Can I Purchase the Thule Sidekick Mounting Screws, Screw Covers, Washers, and Nuts Individually?

Question

Question:

Hi, Is there any way just buying hardware for thule sidekick for mounting screws, screw covers, washers and nuts?

asked by: Calvin V

0

Expert Reply:

While we do have the mounting screws, screw covers, washers, and nuts for the Thule Sidekick Cargo Box # TH78GC, they only come in the kit # TH04958 that includes the rest of the hardware. I confirmed with the Thule schematics for the Sidekick that this hardware collection is the only hardware set available for the box.

expert reply by: Bob C

0

Answer 1

For the full hardware mounting kit for your Thule Sidekick Cargo Box #TH78GC, that is the Replacement Mounting Kit for Thule Sidekick Cargo Box #TH04958. This kit comes with everything you need and includes the following: - 4 U-Bolts - 8 Knobs - 4…

view full answer...

Answer 2

The u-bolts that come with the Heavy-Duty Crossbar Fit Kit for Rhino-Rack Master-Fit Rooftop Cargo Box part #RUBK-MF are 2-5/8" wide which you can see in the attached photo. This measurement is taken from the center of each bolt and the bolts…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

Hey Erik, thanks for reaching out! We can definitely get you to the #ETBC7 kit building off of your Curt Trailer Connector Adapter #C57672. What you need is the Wiring Kit #5506 which has everything else in it aside from the circuit tester. If you…

view full answer...

Answer 6

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 9

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Accuracy is the most important thing when it comes to tongue weight scales in my opinion and convenience is a plus. The etrailer Tongue Weight Scale #e99044 is both. I have gotten my hands on this product and used it. One of my favorite things about…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...