How Wide Are The U-Bolts Included with the Rhino Rack Heavy-Duty Crossbar Fit Kit RUBK-MF

Question

Question:

How wide are the ubolts

asked by: Bruce C

0

Expert Reply:

The u-bolts that come with the Heavy-Duty Crossbar Fit Kit for Rhino-Rack Master-Fit Rooftop Cargo Box part # RUBK-MF are 2-5/8" wide which you can see in the attached photo. This measurement is taken from the center of each bolt and the bolts are 15/64" diameter so if you need the width outside to outside then that would be 2-55/64" or 2-25/64" for the inside to inside width.

expert reply by: Conner L

0

click to enlarge

Answer 1

The U-bolt you are asking about, the Replacement Part for the Thule Sidekick #TH02943 is 4" wide and 2" deep with a threaded portion of about 1-1/2". If you find it too short for your crossbars, you do have different options: First,…

view full answer...

Answer 2

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. I included a video…

view full answer...

Answer 3

The U-bolt replacement you are in need of is the part #TH02943 for your Sears X-Cargo box.

view full answer...

Answer 4

I am not aware of any direct fit mounting hardware kits available for the Sears X Cargo Roof Mounted Cargo Boxes due to their age. As you mentioned, you will need to drill holes in order to mount it onto a set of crossbars. The u-bolts kits are…

view full answer...

Answer 5

The Replacement U-Bolt for the Thule Sidekick, part #TH02943 has the following dimensions: 2 Inches Tall 4 Inches Wide 2 Inch Arms 1 Inch Threaded Arms 3-3/16 between the narrowest point of the arms. I've included a diagram that details these…

view full answer...

Answer 6

Yes, the U-Bolts that come with the Replacement Mounting Hardware for Car Top Cargo Roof Cargo Box #CTC-18PARTS have a 3/16" diameter and are spaced 4" apart on center. I have attached some photos to demonstrate this and some other…

view full answer...

Answer 7

I went out to the warehouse and pulled replacement u-bolt #853-3105 to take some measurements. The width between the two ends is approximately 2-7/16 inches. The center to center distance though is 2-11/16 inches. The internal length is 3-1/2 inches…

view full answer...

Answer 8

I spoke with my contact at Thule, the manufacturer of the Sears Roof X-Cargo Carrier, and you will need Replacement U-Bolt, #TH02943.

view full answer...

Answer 9

I went in the warehouse and measured the U-bolt from Rhino-Rack Heavy-Duty Crossbar Fit Kit , part #RUBK-MF. The width from center to center of the U-bolt is 2-5/8 inches. The height of the U-bolt is 3-5/32 inches. The amount of thread on each bolt…

view full answer...

Answer 10

I may have a solution for you, but there is not a U-bolt available from Thule that is 3-1/2" wide by 3" deep. The closest option available is the Replacement U-Bolt for Thule Trail Large and Medium Cargo Baskets #1500052553 that is…

view full answer...

Answer 11

If you're needing a u bolt that has a width of 4 inches and a height of 2 inches you can use this replacement U-Bolt #TH02943. If you're needing a 3-1/2 inch wide U-Bolt that's only 1-5/8 inches tall you can use this U-Bolt #1500052553.…

view full answer...

Answer 12

The M8 T-bolts in the T-Track Adapter for Thule Cargo Boxes #TH27PQ are 20mm by 27mm. The T-Track Adapter for Thule Cargo Boxes #TH27PQ is actually the replacement for the T-Track Mounting Hardware TH697600. As they have different item numbers they…

view full answer...

How Wide Are The U-Bolts Included with the Rhino Rack Heavy-Duty Crossbar Fit Kit RUBK-MF

Continue Researching