Can 2017 Carado Axion Tow Chrysler Town and Country  

The Trailer Valet JXC Trailer Jack #TV54FR that you referenced does not have a drop leg. I attached a picture that shows the jack full extended and you can see there isn't a drop leg. I also attached a review video for more info on this as…

The Lippert Power Stance Electric Trailer Jack #LC89VR does not have a drop leg. The pin you see by the footplate is only for the footplate to remove and install it. The retraction and extension of the leg is electronically controlled. If…

Yes, the Trailer Valet JXC Trailer Jack #TV54FR can be mounted with the crank handle off the front. This jack has a round mounting plate with multiple hole locations allowing for a forward or side facing.

You will need to replace your entire coupler assembly as the Atwood coupler that you have is obsolete and they are not producing any parts for it. I recommend replacing it with the Demco A-Frame Trailer Coupler #DM14791-97. This coupler uses the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

Waylon, it does look like the Dexstar Steel Mini Mod Trailer Wheel #AM20539 is the same thing as the Dexstar 17-233 wheels you're referring too. These are silver wheels with a 6 on 5 1/2 bolt pattern, a 0 offset, and are made in the USA.