Replacement Extang Trifecta Tarp for 2015 GMC Sierra 1500 with 6.5 ft Bed

Question

Question:

GMC 1500, Crew Cab, 2015

asked by: Barry H

0

Expert Reply:

What year is your truck? The tarp you referenced is a replacement for a short bed Dodge Ram between 2002 and 2008.

expert reply by: Jameson C

0

Barry H.

5/14/2022

GMC 1500, Crew Cab, 2015

Reply

Jameson C.

5/14/2022

Thanks for that, since that would mean your tonneau cover is the part # EX92450 the correct replacement tarp is the part # EX92450-20.

Reply

Answer 1

I am happy to determine the replacement cover for you but I would need the serial number off of your older Extang cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side front…

view full answer...

Answer 2

The replacement tarp you are in need of is the part #EX94450-20 since the Extang Trifecta 2.0 you have on your 2014 Chevy Silverado 1500 6-1/2 foot bed is the part #EX94450. This only fits the 2.0 versions of the Trifecta.

view full answer...

Answer 3

It will be difficult to match up a replacement tarp for the Extang Trifecta tonneau cover on your 2015 Silverado 1500 6-1/4' bed without a serial number. If you have Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding CANVAS #EX94450 then…

view full answer...

Answer 4

I reached out to my contact at Extang and the correct cover is the Replacement Tarp for Extang Classic Platinum Tonneau Cover-Black #EX6770 for your 2007 Ram 1500 Short Bed.

view full answer...

Answer 5

Although there are no kits available to repair the cover on your Extang Trifecta 2.0 #EX92450, I spoke with my contact at Extang who said that a local vinyl shop (they make boat covers) should be able to patch up some tears. If you don't have a…

view full answer...

Answer 6

The Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover EX92635-20 will install following the installation instructions of the #EX92635 you see attached. This is only a fit for the 1994 - 2010 Mazda B Series Pickup 7 Foot Bed and the 1983 -…

view full answer...

Answer 7

The Access Toolbox Edition Tonneau Cover, part #834532002443 is specifically designed to be used with a cross-over style truck bed toolbox that is 20 or 21 inches wide (measured from front to back.) As long as your toolbox is of compatible width, the…

view full answer...

Answer 8

We have exactly what you need for your 2008 Dodge Ram with a 6-1/2 foot bed, the Replacement Extang Classic Platinum Tonneau Cover #EX6770. This is designed to be a replacement for Extang Classic Platinum Tonneau Covers on a 2002 - 2008 Dodge Ram…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...