Replacement Motor and Gear Box for Kwikee Platinum Series Steps

Question

Question:

I have a 2011 Fleetwood with a Kwickee Platinum Series step. Is this the correct gearbox and motor to replace the existing gearbox and motor?

asked by: Brent H

0

Expert Reply:

We do have what you need. The gear box included with the Replacement Lippert Components 5:1 Gearbox With Motor for RV Steps # LC62FR is the correct gear box, but your Kwikee Platinum series steps uses a different motor.

You would want to get the Replacement Motor for Kwikee Electric RV Steps # LC379147 and the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps # LC379160 which would provide you with the correct motor and gear box.

expert reply by: Scott S

0

Answer 1

The correct replacement motor for your LCI motor 366043 on your Kwikee steps is Lippert Components Kwikee Motor and Screws for New IMGL Step Item #LC379147.

view full answer...

Answer 2

As you have been hearing a grinding noise on the Kwikee steps on your 2019 Tiffan Open Road Allegro, I would check the Gear Box and A Linkage #LC379160. If you remove the gear box you will be able to actuate the arm and determine if you feel any…

view full answer...

Answer 3

The Item #LC62FR you referenced will not replace your #909520 motor. You need the Replacement Motor with Mounting Plate for Kwikee Electric RV Steps item #LC379608. This will allow you to replace your bad motor and not have to replace your gearbox.

view full answer...

Answer 4

The Lippert Components Kwikee Step Motor Conversion/Upgrade Kit #LC379145 is what you want for your Model 28 step if you have the "A" linkage. The A, B, or C is embossed on the linkage arm. If you don't have the A, then you will want…

view full answer...

Answer 5

Since you have a Kwikee Series 28 step on your motorhome the correct motor upgrade kit is the part #LC379769 that you referenced.

view full answer...

Answer 6

No, the Replacement Lippert Components 5:1 Gearbox With Motor for RV Steps #LC62FR you're looking at will not fit your Replacement Steps, Motor, and Control for Kwikee RV Electric Steps #LC375632. You'd need to use the Replacement Gear Box…

view full answer...

Answer 7

We do have the correct replacement motor for your 2019 Fleetwood Bounder 36f, but the Replacement Motor for Kwikee 25 Series Electric RV Steps #LC369506 is not it. From you picture I can identify that you have the 676062 motor. We do carry the 676062…

view full answer...

Answer 8

It sounds like you're trying to replace the motor on your Kwikee steps with the part number 366043, and we have just what you're looking for. In order to replace the motor for these steps you'll want to use the Replacement Motor for…

view full answer...

Answer 9

The replacement gear box you need is the part #LC379160 for your Lippert Kwikee RV powered steps.

view full answer...

Answer 10

Since you have an older model version of the Kwikee Series 28 RV steps the solution you need for replacing the control module is the part #LC379769 which is an upgrade kit that includes the new motor and gearbox since the older style module is not…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

I spoke with my contact at Lippert and she said that in order to replace the linkage for your Kwikee 28 Series Steps you will need the Replacement Kit #LC379769. The particular arm that your current Kwikee assembly uses is actually obsolete so this…

view full answer...