Recommended Hitch for a 2022 Toyota Venza

Question

Question:

Looking for a CU89FR for my 2022 Toyota Venza

asked by: George E

0

Expert Reply:

I did some research and the CU89FR Curt Trailer Hitch Receiver item # C67JR fits a 2020 - 2022 Subaru Legacy and a 2020 - 2022 Subaru Outback Wagon. It will not fit a Toyota Venza. For your 2022 Toyota Venza you will want the Curt Trailer Hitch Receiver item # C89UR. I have linked an installation video below.

If you need a wiring harness I recommend the Curt Wiring Harness with 4-Pole Flat Trailer Connector item # C59236.

expert reply by: Jerred H

0

Answer 1

Looking at the available factory options for the 2021 Toyota Venza, it appears as though the Toyota hitch is the Activity Mount. The Toyota Activity Mount hangs just below the bumper. This is also the case with the #C89UR Curt Trailer Hitch…

view full answer...

Answer 2

Once the Curt hitch part #C89UR is installed on your 2021 Toyota Venza the hands free liftgate will still function but the area will be reduced where it would function where you would kick your foot. What that means is that you&#39;d have to…

view full answer...

Answer 3

I pulled up the online owners manual of your 2022 Toyota Venza and Toyota states that it is not recommended to tow with your vehicle which is why they also do not list a towing capacity. So this begs the very valid question of why do we have…

view full answer...

Answer 4

I have attached a photo of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2&quot; #C89UR fully installed on a 2021 Toyota Venza. This is a great hitch choice, as these come with a strong rust-resistant powder coat paint. All…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Curt hitch that fits your 2021 Toyota Venza #C89UR is interesting in that it has the 2 inch hitch size that Class III hitches normally have but has the lower weight capacity of a Class I hitch. So what this calls attention to is the hitch…

view full answer...

Answer 7

The Curt #C89UR is a Class III 2" receiver hitch, a confirmed fit for the 2021 Toyota Venza; there is currently no indication that a 1-1/4" will be available. If you are wanting a 1-1/4" to support current accessories such…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Hitch for a 2022 Toyota Venza

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching