Replacement RV Screen Door Latch Availability

Question

Question:

screen door latches

asked by: Harvey B

0

Expert Reply:

If you are looking for a replacement RV screen door latch, we do carry a few different types depending on what type of screen door you have. For instance, if you have a left-hand Lippert model, the part you need is the Lippert RV Entry Screen Door Latch - LH # LC201472.

I went ahead and attached a product listing that shows all of our replacement screen door latch models.

expert reply by: Bob C

0

Answer 1

Yes you can. Hopefully it's a part we carry or can get.

view full answer...

Answer 2

The Lippert screen door latch #LC201472 is the traditional fit. I've linked the page to all the options we carry for you but none of them have the channel you showed in the attached picture. You may need to create that channel if it is required…

view full answer...

Answer 3

Yes, you are able to use the MORryde X-Factor Crossmember #MR33WR but on the Correct Track front and rear hangers you would also need the Adapter Kit #MR93WR. I do not see any plumbing or other components on your 2018 Highland Range Open Range 374BHS…

view full answer...

Answer 4

The screen door latches that we currently offer do not have the little notch in them like yours does, but you could easily place a shim or piece of wood/composite behind the latch #37206-11865 to give it enough clearance.

view full answer...

Answer 5

I do see your 2015 Keystone Carbon 327 5th wheel toy hauler comes equipped with 7,000lb axles. I recommend going with the AllTrek 4000 Equalizers #MR29DR since you are replacing your suspension components. This is a superior equalizer to the…

view full answer...

Answer 6

The MORryde X-Factor Crossmember #MR33WR is compatible with the Equa-Flex #LC279687 so you will be able to use both on your trailer. You can stick with MORryde for the wet bolt kit and get their Suspension Upgrade Kit for Tandem Axle Trailers. You…

view full answer...

Answer 7

It sounds like you're looking for the MORryde X-Factor Crossmember part #MR33WR which bridges the connection between the center leaf spring hangers for increased stability. Then for an upgraded shackle link kit you can use the MORryde Suspension…

view full answer...

Answer 8

I spoke with MORryde and they said that the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR will work just fine with your frame hangers with gussets. You'll just need to use the circled items attached in the image below and…

view full answer...

Answer 9

When determining what screen door latch you would need either the right hand or left hand side you would need to look at the closed door from the inside of your RV. The latch location is the side of the door that it is mounted on. This would mean…

view full answer...

Answer 10

Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers #MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not…

view full answer...

Answer 11

It looks like your MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR are longer than your previous equalizers were because your leaf springs are way too close to each other. The shackles should be creating more of a "W" shape instead…

view full answer...

Answer 12

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

Replacement RV Screen Door Latch Availability

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching