Fit of Curt Universal Fifth Wheel Base Rails for 1997 Dodge Dakota

Question

Question:

Dear Sir or Madam, While I know that the Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish Item # C16200 is stated as universal, I was wondering if you could verify if it would fit a 1997 Dodge Dakota.

asked by: Anthony F

0

Expert Reply:

Yes, the Curt Universal Fifth Wheel Base Rails with Installation Kit, # C16200 will fit the 1997 Dodge Dakota.

expert reply by: Michael R

0

Answer 1

The only option we can offer for your Forest River Cedar Creek is a full replacement exterior ladder, we have no way of confirming parts for your existing ladder unfortunately. I do agree however that the Stromberg Carlson Exterior RV Ladder part…

view full answer...

Answer 2

I have attached a link below that will take you to the installation manual for the Curt Universal 5th Wheel Base Rail Kit #C16200, which details the complete process for installing the Installation Kit #C16101 that you referenced. The Base Rail Kit…

view full answer...

Answer 3

The Curt Universal Fifth Wheel Base Rails with Installation Kit part #C16200 will work with any Reese 5th Wheel Hitch that mounts to ISR rails. In regards to the pins used to secure the hitch to the rails, these come with the hitch but if you need…

view full answer...

Answer 4

There are 2 different L brackets in the Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish #C16200. One has 3 holes and the other has 4 holes. The mounting holes are consistent in location on both. They are 3/4 inches…

view full answer...

Answer 5

We used to have a Curt A16 hitch with a universal rail kit as part number C16121 but we decided to change the part number configuration. So instead you'd need the rail kit part #C16200 and then the Curt A16 by itself #C16120 and you'd have…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Fit of Curt Universal Fifth Wheel Base Rails for 1997 Dodge Dakota

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching