Replacement 3 Prong Slide Out Switch for Lippert Slide Out

Question

Question:

I have a 2016 Itasca Sunova, Lippert slide out that has a bad switch. I can’t seem to locate a 3 prong slide out switch

asked by: Nancy

0

Expert Reply:

The slide out switches are fairly universal so you can replace yours with the Lippert Slide-Out Switch Assembly part # LC117460 so long as you wire it according to the chart below.

expert reply by: Conner L

0

Replacement 3 Prong Slide Out Switch for Lippert Slide Out
(click to enlarge)

Answer 1

Yes, the Lippert Slide-Out Switch Assembly #LC117460 would work as a replacement for your current switch, but I would definitely check out the wiring running to it to ensure there wasn't additional damage. I've attached a diagram…

view full answer...

Answer 2

We don't have that direct replacement, but the Lippert Components Slide-Out Switch Assembly - Black #LC117460 will work well for your replacement.

view full answer...

Answer 3

The Lippert Components Slide-Out Switch Assembly - White #LC117461 or black #LC117460 will work well for you. I've attached the wiring color coding in a photo to assist in your rewiring.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hello Evan. I do have a solution for you, but I am afraid we do not offer a product that will fit your exact description. We do offer a few 7-way extensions that could potentially be used. Something like the TorkLift Wiring Harness Extension…

view full answer...

Answer 9

Yes, anytime you use a hitch extender or reducer like #HR26 you will lose about 1/3 of your hitches overall capacity. However, since you'll be towing a trailer that weighs between 4,500 to 5,000 lbs, the Brophy Hitch Reducer #HR26 will still work…

view full answer...

Answer 10

Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need…

view full answer...

Answer 11

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs tongue…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement 3 Prong Slide Out Switch for Lippert Slide Out

Product Page this Question was Asked From

Continue Researching