Recommended Replacement for the 26 Greystone SF208-23A

Question

Question:

I am trying to find out what has taken the place of the SF208-26A, or are these still being manufactured?

asked by: Dessie

0

Expert Reply:

The 26" Greystone SF208-26A has been discontinued by the manufacturer. My recommendation is the Greystone 26" Electric Fireplace with Crystals, # 324-000068. This requires a wall cutout of 26-1/4" wide x 20-1/2" tall x 5-3/8" deep. It has overall dimensions of 28-3/8" wide x 21-3/8" tall x 5 1-2" deep.

This LED flame lighting has 4 color settings and an automatic shut-off timer with settings that range from 30 minutes to 9 hours.

expert reply by: Michael R

0

Answer 1

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

view full answer...

Answer 2

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 3

The Furrion Standard RV Microwave, #FMSN09BL has actual measurements of 19-1/16" wide x 13-5/8" tall x 14-1/16" and requires minimum cut-out dimensions of 20-1/4" wide x 13-7/8" tall x 14-5/8" deep. From an online search…

view full answer...

Answer 4

The iRV RV Stereo, #IRV64FR is a Double DIN with HDMI, AUX, Bluetooth and App Control. This requires a cut out of 6-11/16" wide x 3-15/16" tall x 6-11/16" deep. This replacement stereo option will be closest to an exact fit for the cut…

view full answer...

Answer 5

The Greystone SF208-23A is no longer available. My recommendation is the Greystone 26" Electric Fireplace with Crystals, #324-000068. This requires a wall cutout of 26-1/4" wide x 20-1/2" tall x 5-3/8" deep. Your SF208-23A is…

view full answer...

Answer 6

For the replacement cap that will cover the manual override on your Electric A-Frame Jack #EJ-3520-BBX, you will just need the Replacement Cap #EJ-3520-BCP. This will include one cap for your jack.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Recommended Replacement for the 26 Greystone SF208-23A

Product Page this Question was Asked From

Continue Researching