SumoSpring Suspension Upgrade for a 2018 Toyota Tundra

Question

Question:

I been thinking to put summon springs on my tundra 2018 I usually put on the box about 10to 15 concrete ready mix a bags or singles package the and I have a travel 26 travel camper I pull during the summer about two twice a month when I put the the camper is sagging a lot to the point where the camper is not level and also when I put the concrete bags it does the same so I was wonder what color of summo springs I should go without to change my ride when I am not loaded Thank you

asked by: Karlo G

1

Helpful Expert Reply:

For your 2018 Toyota Tundra, I recommend the SumoSprings Solo Custom Helper Springs item # SSR-610-47. These are the black 1,500 lbs capacity ones. They will keep your Tundra level when you're towing or hauling a heavy load. You will not be able to notice them during your daily driving. I have attached an installation video below.

expert reply by: Jerred H

1

Answer 1

The biggest difference between the Timbren and SumoSpring jounce-style springs is that the Timbrens tend to be a bit more stiff which is great for heavier loads but can make the unloaded ride on your 2021 Toyota Tundra a bit more harsh. The…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 9

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...