What Locking Hitch Pin Fits a Rola Cargo Carrier # 59502?

Question

Question:

Can you provide a list of locking pins for the Rola Cargo tray 59502?

asked by: Mike

0

Expert Reply:

Since the Rola Cargo Carrier 59502 includes a 5/8"-11 hitch pin, I confirmed with my tech at Rola that the only confirmed locking hitch pin that is compatible is the HitchMate Threaded Trailer Hitch Receiver Lock for 2" Hitches # HE6001. Since Rola does not make a hitch pin for the carrier, the HitchMate is the lock they recommend.

expert reply by: Bob C

0

Answer 1

We do have options however the Rola Dart cargo carrier is discontinued. The carrier used a specific threaded hitch bolt which is no longer available. We confirmed with Rola that the threading of the pin can be either 7/16 inch-14 or 5/8 inch-11. You…

view full answer...

Answer 2

There is not a replacement lock cylinder for your Rola threaded hitch pin #59915. Since you stated it is a 12mm hitch pin bolt, you may consider the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks #S64029 which is 12 UNC coarse…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

We do indeed have the exact tail light kit you need for the 24x60 Reese Cargo Carrier #63153: - Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers #20174 This light kit is a confirmed fit for the Reese cargo carrier so it is exactly…

view full answer...

Answer 9

With the size of your Champion Generator 200953(23.4" wide, 27.9" long and 21.7" tall I recommend using the 32x48 Reese Solo Cargo Carrier #PS1040100. This has a 47-3/4" long by 31-3/4" wide inner tray and can support up to…

view full answer...