Cover Plate Sizes Of The RV Safe Propane Gas And Carbon Monoxide Detector # RS34FR

Question

Question:

Replacing an expired Lp detector with a rough opening of 3 1/4inch horizontal x 4inch vertical tall. What are the cover plates h x w deminisions?

asked by: Kenneth M

0

Expert Reply:

The RV Propane Gas and Carbon Monoxide Detector # RS34FR actually comes with two different covers which measure 7-1/4" length x 3-3/8" height x 1/4" thick with mounting holes that are center to center 6" apart for the larger cover and 5-3/4" length x 4-1/2" height x 1/4" thick and mounting holes that are center to center 5-1/4" apart for the smaller cover.

expert reply by: Kevin C

0

Answer 1

Since the Atwood LP DOB 31013 is no longer available, your best option is to do a full replacement. I recommend going with the: -RV Propane Gas and Carbon Monoxide Detector #RS34FR for white, or the: -RV Propane Gas and Carbon Monoxide Detector…

view full answer...

Answer 2

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 3

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be…

view full answer...

Answer 4

The RV Propane Gas Detector, #RS64FR should be installed in the horizontal orientation. This comes with two mounting bracket options to help cover over holes such as you describe. These options are 7-1/4" long x 3-3/8" wide or the second…

view full answer...

Answer 5

I recommend the #RS34FR to replace your current LP gas detector. This is a simple 2 wire design making for easy installation.

view full answer...

Answer 6

I recommend the RV Propane Gas and Carbon Monoxide Detector, #RS54FR that has 2 universal mounting brackets included. The alarm dimensions are 4-1/4" long x 2-5/8" wide x 1/2" thick. There are two included mounting brackets to choose…

view full answer...

Answer 7

I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector #RS64FR in white, or #RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas…

view full answer...

Answer 8

I definitely recommend the Timbren springs over the Stableloads. I reached out to my contact at Timbren about the differences between the rear suspension models for your 2016 Chevrolet 3500 4WD and he said that the Timbren Rear Suspension Enhancement…

view full answer...

Answer 9

The Timbren #TGMRTT35D are 5-9/16" tall.

view full answer...

Answer 10

The RV Propane Gas Detector #RS64FR is a surface mount design so you would only need a tiny hole for the wires to pass through the cabinet so you shouldn't need to cut any new holes. This detector comes with two trim brackets (Larger bracket:…

view full answer...

Answer 11

Adding Timbren Rear Suspension Enhancement to your 2018 Chevrolet Silverado 2500 will help to eliminate the porposing or bucking you are experiencing when towing your 5th wheel trailer as they will add more support to the rear suspension of your…

view full answer...

Answer 12

Timbren rear-axle jounce spring kit #TGMRTT35D is intended for severe service vehicles such as tow trucks so for your towing/cargo application you will use kit #TGMRCK25D. This no-drill install is suitable for heavy-duty trucks like your 2500 whether…

view full answer...

Cover Plate Sizes Of The RV Safe Propane Gas And Carbon Monoxide Detector # RS34FR

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching