Upgraded Towing Mirrors For 2019 Ram 1500 Classic With Heat, Turn Signal, Power Fold and Adjustment

Question

Question:

2019 Ram 1500 Classic with power folding mirrors .I took this truck to a dealer to have tow mirrors installed they said they did not have anything that would work, because it was equiped with power folding mirrors. Current mirrors have puddle light, heat, power adjustment and turn signal also. Do you have a mirror that will work, they do not need to be power folding?

asked by: Randy D

0

Expert Reply:

I recommend the K-Source Custom Flip Out Towing Mirrors # KS60203-04C for your 2019 Ram 1500 Classic. These mirrors will retain the power fold, puddle light, power adjustment, turn signals, memory and heat that your current mirrors have. The mirror flips out manually like the factory mirrors on larger Ram truck for towing.

expert reply by: Bud M

0

Answer 1

The Furrion Chill RV Air Conditioner System #FR76FJ does not come with a heat pump. The most similar AC unit we have with a heat strip is the Advent #ACM150CH which has a similar BTU rating of 15k.

view full answer...

Answer 2

Thanks for reaching out, Scott! The Blue Ox Base Plate Kit #BLU74FR on our site is actually the same thing as the Blue Ox part number BX2418 and I like that removable pin style much more than the etrailer Classic Base Plate Kit #e98945 with the fixed…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

view full answer...

Answer 5

Since your weight distribution hitch is working to keep your 2020 Ram 1500 level I recommend going for the lighter Blue #SSR-307-40 springs. These have the 1" spacer as well like the heavier Black #SSR-307-47 springs which you can take out or…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

view full answer...