Height Of SumoSprings Solo Springs # SSR-306-47 For a 2002-2008 Dodge Ram 1500

Question

Question:

I would like this spring to make immediate contact with axel. Does sumo make a spacer or dies the package come with one?

asked by: Gary

0

Expert Reply:

The SumoSprings Solo Custom Helper Springs # SSR-306-47 are designed for the height and travel of the suspension on your 2002-2008 Dodge Ram 1500. First I recommend checking the height of your Ram from the bump stop mount to the axle pad. These SumoSprings are 7-1/4" tall and if that matches the height of your bracket to the pad they will fit without a spacer. If you were to use a spacer it may damage the assembly by restricting the maximum amount of travel of this spring.

expert reply by: Bud M

0

SSR-306-47 Length
(click to enlarge)

Answer 1

Air suspensions is a great way to reduce rear sag when weight is added to the back of your 2008 Dodge Ram 1500. The correct air bag kit for you is Firestone Ride-Rite Air Helper Springs Rear Axle #F2286 or if you have the Mega Cab then you will want…

view full answer...

Answer 2

Using the Timbren rear suspension enhancement system on your 2004 Dodge Ram 1500 4x4 would definitely be safe and would be a good idea to help the suspension of your truck perform better and last longer. The Timbren springs will also help keep the…

view full answer...

Answer 3

The Timbren kit part #TDC2500CA that you referenced would be exactly what I would recommend for your 2006 Dodge Ram 2500 Cummins. This is the most cost effective priced option that also will easily get rid of the sag you are experiencing. It's…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Height Of SumoSprings Solo Springs # SSR-306-47 For a 2002-2008 Dodge Ram 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching