Lug Nut Size of Fulton Spare Tire Carrier FETC0101

Question

Question:

What size are the lug nuts? By size I mean what size socket fits the lug nuts. I need a spare tire mounting bracket with lug nuts the same size as my trailer wheels lug nuts which are 13/16.

asked by: Jim S

1

Helpful Expert Reply:

You found what you are looking for then because the lug nut size is indeed 13/16" for the Fulton Spare Tire Carrier # FETC0101.

expert reply by: Kyle S

1

Answer 1

I checked with Fulton and the Spare Tire Carrier item #FETC0101 that you are looking at has an inner length of 9-1/8" and an inner width of 3-5/8". Depending on the width of your wheel you should not have an issues mounting this to your…

view full answer...

Answer 2

Assuming you have a 4-bolt or 5-bolt bolt pattern on your 12" rims the Fulton Spare Tire Carrier #FETC0101 will fit. This is designed to fit 8", 9", 12", 13", 14", or 15" wheels with 4 or 5 lug rims.

view full answer...

Answer 3

The only type of spare tire carriers we have that will fit a wheel with a 5 on 5" bolt pattern are the u-bolt type. For this, I recommend the Fulton Economy Spare Tire Carrier with Wheel Nut Lock part #FETCSTL0701. You may need to bend the…

view full answer...

Answer 4

Actually when you use the Fulton Economy Spare Tire Carrier #FETCLB0201 that you referenced you do not use nuts to secure the U-bolt. Each of the brackets are threaded and basically become the nuts that hold the tire to the U-bolt. You will just need…

view full answer...

Answer 5

We do not offer U-bolts for the CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 4" #CE32110G, and the mounting holes for these are 2-1/2" apart on center and there is a better option for you. I…

view full answer...

Answer 6

I went out to the warehouse to measure the internal width of CE Smith roller #CE32110G. It measure 1-7/8 inches. I have included a picture showing this measurement for you.

view full answer...

Answer 7

My recommended first step for you to take is to determine what tire size you would need. If you check the plate on the trailer frame near the coupler there will the VIN, axle capacities, as well as the trailer tire size and Load Range recommended.…

view full answer...

Answer 8

I have a solution for you but we do not have a direct replacement for the CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers - 24" Long - 1 Pair item #CE27672 top cap. The Rubber End Cap 2" for 1/2" Shaft by Dutton-Lainson item…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Lug Nut Size of Fulton Spare Tire Carrier FETC0101

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching