Firestone Ride Rite Kit for 2020 Jayco Greyhawk 29MVP

Question

Question:

This Rv has j- ride and hellwig spring on the rear axle , can these air bags be added to the rear without removing what is there now?

asked by: Ray B

1

Helpful Expert Reply:

The Firestone Ride Rite kit part # F2153 has been confirmed as a fit for your 2020 Jayco Greyhawk 29MVP which has the J-Ride so it would fit without any modification. The Hellwig spring wouldn't interfere either.

expert reply by: Jameson C

1

Answer 1

The Firestone Ride-Rite Red Label #F56FV will fit your 2022 GMC Sierra 3500 Cab and Chassis. Even though there isn't a lip the lower bracket will grab onto the striker plate as the hardware is tightened. This combined with the J-bolt will keep…

view full answer...

Answer 2

I do have an option for you to help with rear end support which will reduce rear sag while towing or hauling but we don't offer any lowering kits for the front. I'm not super familiar with the packages you said the truck was equipped with but…

view full answer...

Answer 3

The Roadmaster Battery Charge Line Kit #RM-156-75 and products similar to it are designed to keep the battery of the toad vehicle topped off while being flat towed. Typically supplemental braking system draw power from the battery of the tow vehicle…

view full answer...

Answer 4

For your 2017 Ford E-450 Class C motorhome we have the Firestone Kit part #F2153 as a confirmed fit but you'll want to make two measurements to be totally sure. This requires 2" clearance above frame and the distance from the outside of the…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...