Can I Carry Three Kayaks On My 2012 Kia Sorento With 54" Cross Bars

Question

Question:

I need to haul 3 kayaks on my 2012 Kia Sorento. I have 54” cross bars. Would using 1 Malone foldaway J rack and the Malone foldaway-5 folding multi rack together fit/work?

asked by: Senta

1

Helpful Expert Reply:

Yes, you should be able to carry 3 kayaks on the roof of your 2012 Kia Sorento, provided you do not exceed the weight limit of the roof. The Malone FoldAway-J Kayak Carrier with Tie Downs - J-Style - Folding - Side Loading, part # MAL98FR, and the Malone FoldAway-5 Kayak, SUP, and Canoe Carrier with Tie Downs - J-Style - Folding - Side Loading, part # MAL38FR, both have a 19-1/2" footprint. This will leave you with 15" of usable space on your roof.

I have included product description links, a video of the Malone FoldAway-5 being installed, and a video review link below.

expert reply by: Mark Smith

1

Answer 1

If you are trying to mount the Malone FoldAway-J Kayak Carrier #MAL98FR or the Malone J-Pro2 Kayak Carrier #MPG117MD past the feet of the Malone AirFlow 2 - 50" #MPG215, you will need at least about 4 inches of crossbar space after the feet in…

view full answer...

Answer 2

I reached out to the manufacturer, Malone, and was able to get the measurement you were looking for on the Malone FoldAway-J Kayak Carrier with Tie Downs #MAL98FR. According to Malone, the distance between the mounting holes on the photo you sent is…

view full answer...

Answer 3

Yes. Since the Malone FoldAway 5 #MAL38FR takes up only 19-1/2 inches of crossbars space when deployed or folded, you will be able to use 2 of these carriers on your 58-inch Malone AirFlow 2 #MPG216 crossbars. However, since you are only looking to…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Can I Carry Three Kayaks On My 2012 Kia Sorento With 54" Cross Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching