Recommended Towing Mirrors For a 2022 Hyundai Palisade

Question

Question:

Can you recommend some towing mirrors that will fit my 2022 Hyundai Pallisade that will allow me to see better when I am towing my camping trailer?

asked by: Ann

0

Expert Reply:

I recommend the CIPA Universal Towing Mirrors # 7070-2 for your 2022 Hyundai Palisade. With these universal mirrors you can customize how they fit on your mirrors so you achieve a snug fit to reduce any vibration from the wind when driving on the highway. The mirror itself can be positioned horizontally or vertically to match your desired view.

expert reply by: Bud M

0

Answer 1

Yes, we do offer a plug-in 7-way for a 2022 Hyundai Palisade, the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part #C68JR which is a plug-in fit.

view full answer...

Answer 2

As you will be installing the etrailer Trailer Hitch Receiver #e95ZR on your 2022 Hyundai Palisade I recommend the Curt T-Connector Vehicle Wiring Harness #CU94FR. This will give you a 4-way flat connector that is needed for pulling most small…

view full answer...

Answer 3

Because it is only for a 2022 Hyundai Palisade that has the factory tow package, you do not need to route any wires whatsoever to add the Curt 7-way that fits, which is the following part number: - Curt T-Connector Vehicle Wiring Harness for Factory…

view full answer...

Answer 4

When it comes to installing a towing package on your 2022 Hyundai Palisade I first would recommend The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C13427. This hitch was assembled in the USA and has a gloss black powder coat finish…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 12

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...