Disc Brake Kit Compatible With Lippert 8,000 Torsion Axles
Question:
Does this part fit lippert 8k torsion axles? Im looking for a brake disc conversion but I am having trouble looking at what will fit my axels.
asked by: JASON P
Expert Reply:
Yes, the Kodiak Disc Brake Kit # K2HR858AE will fit your Lippert 8,000lb torsion axle. Your Lippert axle uses a #42 spindle which is what the Kodiak brake kit is designed to fit. Do note that this kit uses 5/8" wheel studs and you may have 9/16" or 5/8" studs on your Lippert axle. Please let me know if you only have 9/16" lugs. You will need the Bearing Kit # DBRKHW850 to complete the hub. And I do recommend keeping an extra Grease Cap # KPCAP on hand in the event it becomes damaged or the Center Plug # KO54FR falls out.
The Kodiak Synthetic Bearing Oil # XLPROLUBE is needed to fill the oil bath hubs. You will likely need one bottle per axle and it is a good idea to keep a spare bottle with the spare cap that I mentioned above for topping off in case of leaks.
I can help you locate a surge brake assembly or electric over hydraulic actuator and all the brake lines needed if you can give me some more information about your trailer.
Products Referenced in This Question
Bearing Kit for Trailer Brakes with 13" Hub/Rotor and 5/8" Bolts - Oil - 8,000 lbs
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 8000 lbs
- Bearing 25580 and 02475
- etrailer
more information >
Replacement Center Plug for Kodiak Oil Cap
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Plugs
- Kodiak
more information >
Replacement Grease Cap for Kodiak 7,000-lb, 7,200-lb, and 8,000-lb Disc Brake Kits
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 2.875 Inch I.D.
- Kodiak
more information >
Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle
- Lubricants Sealants Adhesives
- Oil
- Bearing Oil
- 8 oz
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8,000-lb AL-KO/Quality
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Grease Cap for Kodiak 7,000-lb, 7,200-lb, and 8,000-lb Disc Brake Kits
- Shop: Bearing Kit for Trailer Brakes with 13" Hub/Rotor and 5/8" Bolts - Oil - 8,000 lbs
- Shop: Unitized Oil Seal for Trailer Hubs
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8,000 lbs
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Shop: Replacement Center Plug for Kodiak Oil Cap
- Shop: Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8,000-lb AL-KO/Quality
- Q&A: What Is The Torque Specifications On A 9/16 Inch Lug Nut
- Q&A: Replacement Plug Recommendation for Replacement Grease Cap # KPCAP
- Q&A: Replacement Oil Bath Cover for Trailer Hub
- Q&A: Replacement Rubber Plugs for Grease Cap
- Search Results: oil bath
- Article: Trailer Wiring Diagrams
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Shop: Trailer Wiring
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Video: Aries AdvantEdge Headache Rack Review
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: dust cap
- Shop: Brake Controller
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
on Accessories and Parts
