Dimensions of Buyers Products 3" I.D. Lunette Ring

Question

Question:

Can I get the dimensions for part number 337BDB1238

asked by: Hector M

0

Expert Reply:

Yep, I can give you the available dimensions of the Buyers Products 3" I.D. Bolt-On Forged Steel Alloy Lunette Ring # 337BDB1238.

It's overall length is 20-3/8", the outer diameter of the ring is 6-1/4" while the inner diameter is, of course, 3". The bar that the ring is attached to on the Buyers Products # 337BDB1238 measures 14-1/2" long, 3" wide, and 1-3/4" thick.

expert reply by: Kyle S

0

Answer 1

The Buyers Products 2-1/2" I.D. Bolt-On Forged Lunette Ring #337BDB12281 is 1-1/4" thick. The overall length is 20" and the width of the lunette ring is 5-1/2" while the draw bar section is 2-3/4" wide.

view full answer...

Answer 2

Lunette rings like the Curt SecureLatch Lunette Ring - Adjustable Channel Mount - 3" Diameter - 40,000 lbs #CU99FR do not have tongue or vertical weight limits. These types of rings are designed for heavy duty situations and loads and are not…

view full answer...

Answer 3

You can definitely connect a 5th wheel wiring harness to the bumper 7-way on your truck. The second in-bed 7-way connection is simply to give an easy access point and clean look. It keeps the wiring from dragging or moving against your tailgate, so…

view full answer...

Answer 4

Lunette rings do come in more than one size. The linked page displays both 2-1/2-inch and 3-inch inner diameter. . Lunette ring accessory items are also shown on the other linked page. Weight capacities for lunette rings are substantial, ranging from…

view full answer...

Answer 5

The Curt 5th Wheel/Gooseneck Wiring Harness 7-Pole item #C56000 allows you to use your bumper 7-way and also adds a second 7-way in your truck bed for convenience. This gives you two working 7-way connections. If you want to connect your 5th wheel or…

view full answer...

Answer 6

The capacity listed on the actuator is the limit of the total combined weight of the trailer and anything on it. This actuator has a 20,000 gross trailer weight capacity, and a 2,000 lb tongue weight capacity. As long as the combined weight of the…

view full answer...

Answer 7

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Dimensions of Buyers Products 3" I.D. Lunette Ring

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching