Which B and W Companion Base Fits 2022 Ford F-250 OEM Rail Kit

Question

Question:

Can you confirm if This base will fit a 2022 F-250 short box with OEM puck system

asked by: Chris B

0

Expert Reply:

The correct B and W Companion base that fits the OEM puck system of a 2022 Ford F-250 is the part # BWRVB3300.

expert reply by: Jameson C

0

Answer 1

The pucks on your 2022 GMC Sierra 3500 will not be adjustable as they are a fixed part under the bed. You should be able to loosen up the cotter pins and castle nuts on the Replacement Base for B&W Companion #BWRVB3710 to get the hitch to…

view full answer...

Answer 2

GM changed the OEM hitch puck mount layout for the 2020 model year due to a change in the truck frame geometry, and it remains the same for the 2021 model year as well. Therefore, the #BWRVB3710 replacement base would indeed be compatible with the…

view full answer...

Answer 3

We have the correct B and W base assembly for allowing you to fit the head of your current Companion in the bed of your 2020 Chevy Silverado 3500 with the factory rail kit but the specific kit you need depends on the length of your bed. If you have…

view full answer...

Answer 4

It looks like your 2020 GMC Sierra 3500 has the factory prep package with the puck system, and there is a solution for you to convert your B&W Companion #BWRVK3500 to fit those pucks, but there isn't an adapter because of the unique…

view full answer...

Answer 5

Yes, you can take the head off of your current Companion hitch and fit it to the Companion base for OEM GM pucks part #BWRVB3710 and you'd have a complete hitch that fits your 2022 Chevy Silverado 3500 with OEM pucks.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Which B and W Companion Base Fits 2022 Ford F-250 OEM Rail Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching