Compatibility of Gen-Y Glyder Shock Absorbing Ball Mount With Surge Brakes and Lower Tongue Weight

Question

Question:

I have two questions regarding the glyder. First, I do understand it is ideal for 400-700lb tongue weight. Is it still ok to use with lighter weights iin the 250-300 lb range? How about an empty trailer. Second, are there any compatibility issues with the glyder and surge brakes?

asked by: Brian

0

Expert Reply:

There will be no issues with using surge brakes along with the Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 6" Drop - 7K # 325-GH-12005. Also, the Glyder can be used with a lower tongue weight and an empty trailer. The only problem is you need to be at the 4-700 lb range in order to benefit from the built-in shock absorption. If your loaded tongue weight is going to be 250-300 lbs then I would not recommend using this ball mount.

Instead, I would recommend the Curt RockerBall Anti-Rattle Towing Kit. We have the # C63KR with a 2" rise and 3" drop or the # C43KR with a 4" rise and 5" drop available. Either of these will work with your lower tongue weight and are a great option. The Curt ball mount uses ShockDrop technology, which is engineered to suppress vibrations and rattling while you're towing. When you hit a bump, the ball compresses around the flexible, polyurethane core.

I have attached a review video for your reference.

expert reply by: Robin H

0

Answer 1

The Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount part #CAB-UM is indeed an excellent option that will help improve the overall towing experience by decreasing the felt road shock in the tow vehicle. The Convert-A-Ball in particular as you…

view full answer...

Answer 2

For a replacement shock-absorbing adjustable ball mount I recommend the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 10,000 lbs #325-GH-1025. The Gen-Y design is incredibly sturdy and will have no problem…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Answer 9

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need…

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Compatibility of Gen-Y Glyder Shock Absorbing Ball Mount With Surge Brakes and Lower Tongue Weight

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching