Hitch Install for 2021 BMW X3

Question

Question:

Where can I install a trailer hitch in Denver, Colorado? Do you have a list of shops you recommend? Thank you, Andres

asked by: Andres H

0

Expert Reply:

We actually have a feature on the web page for the Draw-Tite # 76226 that can be used to locate a local installer. Simply use the provided link and input your zip code.

The Draw-Tite # 76226 is a fit for selected 2011-2022 BMW X3 models. If you'll be using the hitch for towing purposes, you'll also need a trailer wiring harness like part # TK77FR which is compatible with the 2018-2022 BMW X3. You'll also need a ball mount like # D-28, a hitch pin like # PC3 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.

expert reply by: Mike L

0

How To Find Local Installation Help
(click to enlarge)

Answer 1

Sounds like your Trooper has separate turn signals from the brake lights and what you are trying to do is wire up a trailer connector that is designed for combined circuits. This is a fairly common problem and the solution is to wire in a signal…

view full answer...

Answer 2

It sounds like you have a trailer taillight that grounds through the mounting hardware. Typically the red wire would run to the turn signal/stop light circuit and the black would run to the taillight circuit, and then the ground circuit would be…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Hitch Install for 2021 BMW X3

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching