2022 Mazda CX-5 Roof Rack Recommendation for Thule Force Roof Box

Question

Question:

Hi - I want to get the Thule Force XT XXL for my Mazda 2022 CX5. I will also need a roof rack. Thanks

asked by: Noel

0

Expert Reply:

For your application I recommend going with a Thule WingBar Evo roof rack because they look sleek and are easier to install than most other roof racks. The correct parts depends on if your 2022 Mazda CX-5 has a bare roof or the flush mount rails:

Bare Roof
53" WingBar Evo Crossbars - Black # TH711420 or Silver # TH711400
Evo Clamp Feet - # TH710501
Fit Kit - # TH145079
Lock Kit - # TH450400 (optional)

Flush Rails
47" WingBar Evo Crossbars - Black # TH711220 or Silver # TH711200
Rapid Podium Feet - # TH460R
Fit Kit - # THKIT3160
Lock Kit - # TH450400 (optional)

As far as the roof box goes, the Thule Force XT XXL # TH6359B will technically fit, but it's a few inches too long and you won't be able to completely open up your rear hatch. If you really want the 22 cu ft of space then you'll just need to hold onto your hatch door to make sure it doesn't hit the box. Otherwise you can go with the slightly smaller Thule Force XT XL # TH6358B which fits just fine.

expert reply by: Jon G

0

Answer 1

Fortunately, we do have a review video that shows how we measure the 13-1/4 inch height of the Thule Motion XT Alpine #TH629506. The height is measured from the bottom of the box itself (not from the bottom of the clamps that attach the the…

view full answer...

Answer 2

The Thule Motion XT Rooftop Cargo Box part #TH629807 provides 18 cubic sqaure feet of storage which will work well to carry your 181 cm skis. The box measures 79" long and can carry a maximum snow board or ski length of 200 cm. It also provides…

view full answer...

Answer 3

Both the Yakima SkyBox NX 16 #Y07335 and the Thule Motion XT L #TH629706 are excellent options that look great, feature dual side access, and give you 16 cu ft of extra cargo space. I recommend going with the Motion XT L though because it allows you…

view full answer...

Answer 4

I may have another option for you, but the original Thule 460 podium feet have been discontinued and we do not have any old stock left. Instead I recommend changing your crossbars and using the newer Thule Rapid Podium Feet #TH460R. Since you are…

view full answer...

Answer 5

It sounds like you are looking at the Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 #TH711400, and Evo Raised Rail Feet #TH710401. The crossbars are 3-1/8" wide x 1" tall which will absolutely fit the Skybox…

view full answer...

Answer 6

I pulled some Thule AeroBlade crossbars along with the mounting hardware for a Yakima Skybox part #Y95AV to do a test fit for you. The Thule Snowboard Rack needs 4-1/2 to 5 inches of free bar space to fit, so if you have that much space on your…

view full answer...

Answer 7

The best overall system that we have for your 2019 Mazda CX-5 is the Thule WingBar Evo Crossbar Roof Rack part #TH711400, part #TH710501, and part #TH145079. The reason being is that they are the best quality, have the quietest crossbar design on the…

view full answer...

Answer 8

I checked with Thule and there is a fit for a roof rack on your 2017 Mazda CX-5 with flush rails. The best option consists of Thule WingBar Evo Crossbars #TH711220, Rapid Podium Feet #TH460R, and Fit Kit #THKIT3160. This would be the route I would go…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...