Redarc Tow-Pro Liberty Brake Controller for a 2012 Ford Escape V6 w/ out a Tow Package

Question

Question:

Hi. Can I use the Redarc Tow-Pro Liberty Brake Controller - Proportional universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers Part Numbers: RED24FR,RED69FR in place of the Tekonsha Prodigy P3 Trailer Brake Controller item # 90195 you recommended because my fit in the escape is limited and I can see myself hitting the under dash model with my leg?

asked by: Mark D

0

Expert Reply:

Yes, you can install the Redarc Tow-Pro Liberty Brake Controller item # RED24FR in your 2012 Ford Escape. The Tow-Pro is also a proportional brake controller and is great for saving space on your console. The control knob mounts in your dash or other easily accessible area. The main unit is able to be installed out of sight and can be mounted at any angle and will still accurately sense the deceleration of your vehicle. Since your Escape doesn't have the tow package you will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR to complete the installation.

We have a couple of other mounting options for the control knob that can go inside inserts in your dash. The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. There is also the option of using the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-002 for the more standard knock-out measuring 1-1/4 by 7/8 inch. I have linked a couple diagrams to show you the dimensions of these mounts.

expert reply by: Jerred H

0

Redarc Control Knob Mount
(click to enlarge)

Answer 1

I would be happy to help! You are correct that on vehicles like your 2016 Kia Sorento you will not want to get the brake light signal directly from the stop light switch. Picking up the signal there will only activate the trailer brakes when you…

view full answer...

Answer 2

Since your vehicle does not have a brake controller port, you will want to use a universal wiring pigtail. For example, if you have a Tekonsha brake controller, you could use a Plug-In Harness for Tekonsha and Draw-Tite Brake Controllers #20127. You…

view full answer...

Answer 3

Appreciate the purchase of the Redarc Tow-Pro Liberty Brake Controller #RED24FR, and that blue light does go off eventually - it will fade out after roughly 15 minutes. Keep in mind once you open the door the blue light will come back on, so it may…

view full answer...

Answer 4

The best place to find the stoplight circuit on a vehicle like your 2020 Subaru Outback is going to be at the brake pedal switch. You'll need to use a circuit tester like part #PTW2993 to test all of the wires till you find the circuit that only…

view full answer...

Answer 5

There sure is! The Redarc Encapsulated Power Diode for Tow-Pro Brake Controllers #RED34FR you were looking at gets wired as shown in the included diagram. One of the red wires goes to the red brake output wire on your trailer brake controller, the…

view full answer...

Answer 6

You can install a brake controller on your 2020 Subaru Outback, and there is indeed a stop light switch on the vehicle. I have added a photo from a video of a brake controller install we did on a '20 Outback that shows the location of the stop…

view full answer...

Answer 7

I was able to find the same information as you in the owners manual for your 2022 Chevrolet Blazer that states the 4 blunt wires behind the headlight switch. I was able to find where one person found the wiring near where the brake pedal mounts(see…

view full answer...

Answer 8

That has to be a brake controller issue. Sounds like the controller is backfeeding the stoplight circuit it taps into as a signal wire with voltage which is then activating your brake lights. When this happens the brake controller is in need of being…

view full answer...

Answer 9

The point of the brake light relay kit #RM-88400 isn't to disable the lights so you wouldn't want to pull any fuses, it's meant to ensure that the lights in your towed vehicle display the same as your motorhome so that you can properly…

view full answer...

Answer 10

I would be happy to help you get the parts you need to install a trailer brake controller in your 2018 Toyota RAV4 Adventure. You are correct that the best place to connect the red brake signal wire of a trailer brake controller to a vehicle is the…

view full answer...

Answer 11

Since your 2022 Honda Pilot does not have the tow package then it will not have the plug and play adapter port. You will need to use the Universal Wiring Harness item #RED69FR to install the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you…

view full answer...

Answer 12

Yes, you can use a fuse tap like the part #F2526 to tap into the stoplight circuit of the vehicle for a dedicated brake signal for installing a brake controller. Any time the brake lights are turned on this circuit would have voltage on it.

view full answer...

Redarc Tow-Pro Liberty Brake Controller for a 2012 Ford Escape V6 w/ out a Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching