Can Trailer Valet XL be Used on Slopes or Grades

Question

Question:

Do any trailer valet work on any slope?

asked by: Jan

0

Expert Reply:

Yes the Trailer Valet XL part # TVXL2 can handle slopes and grades. We had a customer report back to us that this handles a 10 percent grade easily.

expert reply by: Jameson C

0

Answer 1

The instruction manual for the Trailer Valet XL Trailer Dolly with Chain Drive item #TVXL2 states not to use the dolly on any flat or paved incline or decline that is steeper than 10 degrees.

view full answer...

Answer 2

The Trailer Valet XL #TVXL2 attaches actually to the coupler of the trailer. As long as you attach it properly to the trailer you wouldn't have to worry about it folding. I attached an install video that shows how it functions and installs as…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 7

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Answer 8

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 or the 2 inch ball #TVXL2 have two different drive gears to make it easier to go up an incline or to overcome a lip in the concrete as you described.…

view full answer...

Answer 9

Thanks for reaching out! The purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR is to give you better maneuverability with a tandem axle trailer when utilizing a trailer dolly like the Trailer Valet XL #TVXL25. The…

view full answer...

Answer 10

Yes, we do have a solution for you. I recommend the Trailer Valet XL trailer dolly #TVXL2 which has a 2" ball. This trailer dolly has an integrated drive system that allows you to easily move your trailer. The dual posi-traction wheels help you…

view full answer...

Answer 11

The Dexter DX7.5L A-60 Brake Actuator part #DX89FR for disc or part #DX33FR for drum will work to replace both a UFP A-60 or A-75 Brake Actuator so there will be no worried here. The A-60 is rated for 6K and the A-75 is rated for 7.5K. The Dexter…

view full answer...

Answer 12

What you need is a little bit of momentum to get the boat trailer over the lip of your garage floor. If you can get the trailer moving at a decent speed (while still maintaining control), the momentum of the trailer will carry it over the lip.

view full answer...

Can Trailer Valet XL be Used on Slopes or Grades

Product Page this Question was Asked From

Continue Researching