Front Hitch Receiver or Bumper Guard for a 2019 GMC Sierra 2500

Question

Question:

Do they make a bumper guard for the hitch

asked by: Allen G

0

Expert Reply:

The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" item # 65078 mounts below the tow hooks on your 2018 GMC Sierra 2500. All of the grille guards like the Aries Pro Series Grille Guard with Mesh LED Cover Plate - Textured Black Powder Coated Steel item # AAP4085 mount inside the frame where the tow hooks are mounted. The problem is they occupy the same space on the front end of your truck. The receiver would be blocked by the bar at the bottom of the grille guard. You will have to choose between one or the other.

expert reply by: Jerred H

0

Answer 1

The front ends of the Silverados and Sierras like your 2018 GMC 2500 are a bit different but the fascia trimming required is the same as you can see in the two attached pictures when installing front hitch #65078. Basically a hole gets cut through…

view full answer...

Answer 2

We do have a front mounted receiver option that would work for your truck, but the Draw-Tite #65078 isn't a good fit for the Denali trim. The Denali front clip is different than the other trim levels, and in order to install the hitch major…

view full answer...

Answer 3

You can definitely carry the Thule EasyFold XT #TH903202 with a front mount hitch on your GMC Sierra 2500 Denali! It looks like you input a 2019 GMC Sierra 2500 in as your vehicle. If this is the year that you have then we have 2 different front…

view full answer...

Answer 4

The tow hooks on your 2015 Chevrolet Silverado 3500 do not need to be removed to install the Draw-Tite Front Mount Trailer Hitch Receiver part #65078. The bolts that hold the tow hooks do get removed but only to set the trailer hitch in place as they…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Front Hitch Receiver or Bumper Guard for a 2019 GMC Sierra 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching