Recommended Spare Tire Carrier For Yoke Of 20' Utility Trailer

Question

Question:

Bought new Black Rhino 20-ft utility trailer. Looking for robust spare tire carrier for front yoke.

asked by: William R

0

Expert Reply:

The Demco Spare Tire Carrier for up to 4" Trailer Tongue - Black, part # DM15851-76, is our most robust spare tire carrier that can attach to the yoke of your Black Rhino 20 Foot Utility Trailer.

I have included a product description link and a video review link below.

expert reply by: Mark Smith

0

Answer 1

I have a solution for you but you're going to have to make sure you can bolt this tire carrier near the edge of your trailer. It is the Demco Spare Tire Carrier for up to 4" Trailer Tongue item #DM15851-76. The height to the center of the…

view full answer...

Answer 2

Yes, the Demco Spare Tire Carrier part #DM15851-76 does work great with the tire size ST235/80R16 that you referenced. We had a customer with your exact tire size send us a picture of it carrying the wheel which I attached.

view full answer...

Answer 3

We have spare carriers like the part #UF15-954730 which were designed specifically to attach to a 4 inch RV bumper which would be my first pick for your application but since the #DM15851-76 was also designed to attach to a 4 inch by 4 inch metal…

view full answer...

Answer 4

Using the Stromberg Carlson Bike Bunk, #CC-275 for a spare tire carrier, but instead of attaching a bike rack to the 2" receiver you use the etrailer Hitch Mounted Spare Tire Carrier for 2" hitches, #e98ZR is a viable option. It sounds as…

view full answer...

Answer 5

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

I have a solution for you but you will need to supply your own pipe to get your desired 33-1/4 inch size. The Universal cam-door lock with 1 inch keeper #383200 will allow you to create a bar lock assembly of 33-1/4 inches. With this item you supply…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...