Plug-In Adapter Changing From Pre-Wired Voyager to Furrion Camera System

Question

Question:

Are there adapter mounting brackets or crossover wiring connectors when a RV is prewired for Voyager Rear camera, but wanting to install Furrion S rear camera. I have a 2019 Winnebago Minnie 2606RL bumper pull trailer

asked by: Mark

1

Helpful Expert Reply:

While there is not a plug-n-play adapter to change from on brand to the other, you can still use the wires from the pre-wired Voyager system on the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision, # FOS05TASF by cutting the adapters from one and splicing to the other.

expert reply by: Michael R

1

Answer 1

We have the perfect solution but the Furrion Vision S W is not compatible with the pre wiring from Voyager. Instead the Voyager WiSight Wireless RV Backup Camera #ASA24YR is the way to go. This will allow you to use the already existing bracket to…

view full answer...

Answer 2

The pre-wiring of Furrion pre-wired RVs is basically just two wires as well as the Voyager harness like part #PSVCWVCMS130AP. One wire is the power wire which is the running light circuit and then the other is the ground so it really would just be…

view full answer...

Answer 3

It is safe to tow with a hitch extender like the Curt #C45796, but it is important to note that using any type of adapter, including an extender, reduces the weight capacity of your hitch by 50 percent.

view full answer...

Answer 4

To safely execute a 90 degree turn you want at least 4 inches of clearance between the truck cab and trailer. The head of the #BWRVK3400-5W is adjustable from front to back so you may be able to adjust it back a little bit for better clearance…

view full answer...

Answer 5

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 6

Demco actually has a kit that was designed to convert an Air Force One kit to a Stay in Play DUO which is what you would need since you have hydraulic brakes with the part #SM99231. This will work with what you have now and work great. If you send me…

view full answer...

Answer 7

You can have more than one iPhone "connected" to the Lippert Tire Linc system part #LC37VR but only one can be used at a time. So basically you or your wife could have their phone connected but if you needed to switch between the two phones…

view full answer...

Answer 8

Trailer weight distribution hitches (WDH) such as the Curt TruTrack systems #C17499 and #C17500 do come in varying weight capacities. Selection of the correct one for any given towing setup is based on the actual fully-loaded tongue weight (TW). It…

view full answer...

Answer 9

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 10

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 11

There is a wireless camera you can use for your travel trailer that will always be on. It is the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision item #FOS05TASF. It comes with a 5" monitor and you will want to wire the camera…

view full answer...