Hardware For Cam-Action Lockable Door Latch

Question

Question:

What size hardware is needed for Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Stainless Steel Item # PLR3057-SS

asked by: Patrick J

0

Expert Reply:

A 1/2 inch bolt is needed, with the size depending on your application for the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Stainless Steel # PLR3057-SS.

expert reply by: Kyle S

0

Answer 1

From what you have told me, you already have the lighting circuits connected on your 7-way. You would need to add the brake output circuit and the 12-volt accessory circuit if needed. I have linked you to an FAQ article on trailer wiring that shows…

view full answer...

Answer 2

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 3

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 4

I recommend the LubriMatic LMX Industrial Strength Grease #L11390 for your Dexter axle on your 2021 Vista Cruiser Travel Trailer. This grease is specifically formulated to work in extreme hot and cold temperatures under high pressures. It is also…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Thanks for reaching out, Sam! The Kodiak Disc Brakes #KOD59FR with the Dacromet/KodaGuard are definitely a solid choice, but the hub-rotors and brackets only have a 300- to 400-hour salt spray rating and the calipers have a 500- to 600-hour salt…

view full answer...

Answer 7

Hey Eugene, the LMX RED grease like part #L11390 is the best option. It's the most heavy duty, waterproof, and is compatible with basically all greases. I would be cautious not to over fill the hub though as it's pretty easy to blow out seals…

view full answer...

Answer 8

I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 on the Wet Bolts #LC52SV for the Road Armor Shock Absorbing Equalizer Kit #LC696740. This grease is formulated for superior performance in cold and hot climates. It is also…

view full answer...

Answer 9

Red lithium grease such as #L11390 is one we use often here for installations and it is compatible with other Lithium formulas. I have included a link to our help article that covers grease compatibility. There are greases that are not compatible…

view full answer...

Hardware For Cam-Action Lockable Door Latch

Product Page this Question was Asked From

Continue Researching