Bolt On Boat Trailer Jack Capable Of Extending Over 30" Tall

Question

Question:

I have a Pro customer looking for a tall 30-36inch jack that will keep the bow of his boats up higher than the transom to keep water flowing out during storage or service times do you know what model would work for this?

asked by: Beth S

0

Expert Reply:

The Extreme Off-Road Ratcheting Trailer Jack # ARK54FR is going to be our tallest side wind pivoting jack that will mount the side of the boat trailer frame. This jack will extend to 32-1/4" from the center of the mounting point on the jack to the base of the wheel. The jack is rated for a tongue weight up to 1,100lbs and will allow them to move the trailer with the ratcheting handle.

expert reply by: Bud M

0

Answer 1

Thank you for the picture. That kayak carrying device certainly does look cumbersome. Quite the interesting contraption. While generally we do not recommend modifying products like this, but I am happy to help if I can. With the bar being only…

view full answer...

Answer 2

You can find the cover for the Fulton F2 jack gearbox here: Replacement Gearbox Cover #F500135. But if you are referring to the gearbox itself then that is unfortunately not available. I recommend looking into a new jack such as Fulton Bolt-Thru…

view full answer...

Answer 3

While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack #MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack #DL67MR. This…

view full answer...

Answer 4

I would be happy to help, but I have no way of looking your trailer by the serial number to determine which replacement side mount jack is correct. Based on the picture you provided of the jack on your Dorsey Malibu Boat Trailer a standard bolt on…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Answer 10

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 11

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are…

view full answer...

Bolt On Boat Trailer Jack Capable Of Extending Over 30" Tall

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching