Installation Hardware For Westin E-Series Step Bars, on a 2009 Chevrolet Silverado Exteneded Cab

Question

Question:

does this product come with a mounting kit?

asked by: Steve B

0

Expert Reply:

Yes, the Westin E-Series Step Bars, item # 23-1680, comes with all the necessary hardware for an easy, no drill installation on your Vehicle.

expert reply by: Robert G

0

Answer 1

The Westin Stainless Steel tube steps, part #23-1680 are indeed a fit for your 2011 Chevy Cheyenne (Silverado here in the USA) 2500 Extended Cab truck. If you'd care to see other accessories for your truck, click the provided link.

view full answer...

Answer 2

According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric Trailer…

view full answer...

Answer 3

On your 2006 Chevy Silverado 1500 there is a black junction box at the back of the floorboards and to the left of the brake pedal. If you take that cover the brake controller plugs into the top row, second spot from the left. It will be the same as…

view full answer...

Answer 4

That is correct, the Custom Underbed Installation Kit, #BWGNRK1067-5W, installs by using existing holes in the frame of your 2007 GMC 2500HD Classic so there is no drilling required to install the frame brackets. This installation kit is designed for…

view full answer...

Answer 5

To replace the step pad on a Westin E-Series Nerf Bar like the #23-1680 you'll need to use the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 #23-0001, which will work on any of the 4 spots these pads…

view full answer...

Answer 6

You have found it! Oil cap kit #RG04-300 includes the 21-88 oil cap you are looking for. The plug and o-ring are also included.

view full answer...

Answer 7

From the picture you provided, it looks like you have the Westin E-Series 3" Round Nerf Bars #23-1680 which is confirmed to fit your 2008 GMC Sierra 1500 extended cab. The correct replacement hardware kit is #23-168PK. If your running boards are…

view full answer...

Answer 8

The installation for the Westin Tube Steps, part #21-1685, is a three point attachment. I have attached a photo that shows the center bracket installed. These steps are custom fit and require no drilling when installing. They bolt to the existing…

view full answer...

Answer 9

The replacement bracket and hardware kit for your 2500 crew cab are the Replacement Installation Hardware for Westin Platinum Series 4" Oval Nerf Bars part #21-195PK.

view full answer...

Answer 10

I went out to the warehouse and pulled Curt forged ball mount #C45456 to measure it for you. The width at the platform is 3-1/16 inches wide. And in case you were curious, the platform is 1 inch thick.

view full answer...

Answer 11

Yes, the Curt Forged Ball Mount, part #C45456, can be used in either the rise or drop position. It provides either a 1/2 inch of rise or 2 inches of drop. I've linked an article to help you determine the amount of rise or drop you need to see if…

view full answer...

Installation Hardware For Westin E-Series Step Bars, on a 2009 Chevrolet Silverado Exteneded Cab

Product Page this Question was Asked From

Continue Researching