Lift Kit that Can Fit 2002 Exiss Horse Trailer

Question

Question:

Do you have a lift kit for a 2002 exiss horse trailer, let me know if you need more information.

asked by: Sandra W

0

Expert Reply:

For a lift kit that would work great on your 2002 Exiss horse trailer we have the Correct Track part # RR23QX which can give a lift of up to 2-1/4 inches.

expert reply by: Jameson C

0

Answer 1

I do have a few easier options for you to determine the weight capacity of an axle other than using the bolt pattern or the number of lug nuts. The problem with using the bolt pattern to tell the axle capacity is that an axle may have the a bolt…

view full answer...

Answer 2

There is always a way to make it work. I can't recommend doing that as I have not tested it and I do not offer a product like that with the exception of the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00. This will give you a…

view full answer...

Answer 3

The key to installing a lift kit on a tandem trailer with torsion axles is confirming that the axles use side-mounted brackets. Torsion axles that mount from the top cannot use lift kits. We offer 2-7/8-inch Lift Kit #K71-724-02 for #11 Torflex axles…

view full answer...

Answer 4

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

view full answer...

Answer 5

For your horse trailer with Dexter Torflex 3500 lb axles, you will need the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02 along with two sets of the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit #DX54FR which…

view full answer...

Answer 6

Ideally you want your trailer to be towed as level possible and still have at least 6 inches of clearance between overhang of the trailer and the bed rails of the truck. Since trucks tend to keep getting built taller and taller this can prove to be…

view full answer...

Answer 7

I have the correct kit for you! The SLR P-15 unfortunately does not designate the particular model Dexter Torflex axle you have. However, given the 7,000 pound weight capacity of your axles, you either have the tandem Torflex #12, #12T, or #12V…

view full answer...

Answer 8

I might have an option for you but I don't know what exact jack you have on your Exiss Horse Trailer. That said, they are usually welded so there's not really a bolt-on replacement. The Buyers Products Heavy-Duty 4" Square Jack part…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Lift Kit that Can Fit 2002 Exiss Horse Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching