Can I Use Older Yakima Lock Cores with SkyLine Towers

Question

Question:

I have lock cores from a Yakima system from 35 years ago. It was the towers that had clips on to use on a bare roof. Can I use the lock cores from that on the skyline towers?

asked by: Karen R

0

Expert Reply:

Thanks for reaching out! For the SkyLine Towers you'll need to use the current Yakima Same Key System Lock Cores which can be found as part # Y07204. Yakima changed their lock core system back in the 90's so all of the current lock cores have an A followed by 3 digits for their core number. These can be interchanged with any of the Yakima products. Anything before that is a specific lock core that was designed to work with that product only.

expert reply by: Jon G

0

Answer 1

Great question! The Yakima FrontLoader #Y02103 has 2 places for a lock core to be added; one to lock the rack to the roof rack and one to lock the bike to the rack. If you want matching lock cores for both bike racks then you need a 4-pack of lock…

view full answer...

Answer 2

You can order individual lock cores or keys that are A131 or A153, although you can't specify the lock core and key numbers when you order a bundle. So if you wanted additional A131 or A153 lock cores you would need: Lock Cores - A131:…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 #Y64AR -RoundBar SL Adapter for Yakima BaseLine,…

view full answer...

Answer 6

Yes, the TrackTowers for Yakima Crossbars and Platforms #Y52AV that you referenced do fit the Rhino-Rack RTC-Style Roof Rack Tracks #RTC18.

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray #Y05045 with the TimberLine Towers for Yakima Crossbars #Y33TR, and the LockNLoad SL Adapter for…

view full answer...

Answer 9

To add a flush mounted roof rack to your 2024 Mazda CX-50 with roof rails you will need the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - Aero Crossbars - Black - Qty 2 item #Y63UV SightClip Fit Kit for Yakima SightLine and…

view full answer...

Answer 10

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…

view full answer...

Answer 11

I would be happy to! To add a roof rack to your 2024 Chevy Trailblazer with flush roof rails you will need the following parts: Yakima SkyLine FX Roof Rack - JetStream Aero Crossbars - Black - Qty 2 item #Y66UV Landing Pad 19 for Yakima SkyLine and…

view full answer...

Can I Use Older Yakima Lock Cores with SkyLine Towers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching