Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid

Question

Question:

Im looking for your advice to attach an older version Thule Hullavator 897XT 2 sets to a 2024 Honda CRV Hybrid with roof rails no crossbars. I have done well with 48 inch Yakima round bars and Q Towers that clamped to the rails of a narrower 2009 Ford Escape. I own 58 inch and 76 inch yakima bars as well. I will need a way to extend the Hullavator far enough away from the sides of the Honda. Are there mounting towers for the Honda that would allow the use of the round bars? What would you recommend? Thank you

asked by: Jim F

0

Expert Reply:

There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following:

-SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR

-RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536

-SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR

If you have Yakima Same Key System locks you can transfer them over or you can add new locks using # Y07204.

expert reply by: Robin H

0

Jim

3/27/2024

Thank you for your reply. Do you carry the parts to attach the Hullavator 897xt to the bars including the bar mount assembly and necessary hardware? Thank you, Jim

Reply

Robin H.

3/28/2024

@Jim the following parts should be everything you need to mount the old 897XT to your round bars: -Replacement Underbar Bracket for Thule Hullavator # TH8535860 -Replacement Pivot Pin for Thule Hullavator # 853-5869 -Replacement M6 x 22 Carriage Bolt # 915-0622-54 -Replacement M6 Washer # 951061254 -Replacement Round Nut for Thule Carriers # 853-5439

Reply

Jim

3/28/2024

@RobinH What about the Bar Mount Assembly, do you have those as well (part that the Hullavator attaches to). Thank you, Jim

Reply

Robin H.

3/28/2024

@Jim yes we do have the Replacement Bar Mount Assembly for Thule Hullavator # TH753352403.

Reply

Answer 1

Your older style Thule Hullavator is designed to fit Thule Aeroblade bars but it mounts to them in the channels that are on top of the bars and not by wrapping around them. The bolts needed are part #919061654 which then thread to the square nut…

view full answer...

Answer 2

Yes, we do! To add a set of crossbars to the flush mounted rails on your 2024 Honda CR-V, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item #Y00425…

view full answer...

Answer 3

The Hullavator Pro #TH898 will work just fine with Yakima round bars and will not require any additional hardware like what you mentioned. The only step that you will skip in the instructions is installing the special angled end cap (page 5) but my…

view full answer...

Answer 4

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 5

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 8

Fascia trimming is required to install the etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V, but this is the case for all of the hitches that fit your vehicle. According to the instructions you'll be cutting out a notch that is…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

We have checked with the manufacturer on this in the past. We have confirmed that the Draw-Tite class 3 hitch #DT79MR will fit the 2024 Honda CR-V hybrid. This is a class 3 hitch with a 2" receiver. We have also confirmed fitment with several of…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...