Will The Batwing Awning Fit On Rhino Rack Vortex Crossbars?

Question

Question:

What mount do I need to use to mount a batwing awning on RhinoRack Vortex crossbars.

asked by: Mike P

0

Expert Reply:

if you have the Rhino-Rack Vortex Crossbars like # RRVA137B-2, then the Rhino-Rack Batwing Awning # RR33100 will mount directly to the top channel on your crossbars.

All the mounting hardware is included with the Batwing Awning.

expert reply by: Bryce D

0

Answer 1

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...

Answer 2

I talked to Rhino Rack in regard to you upgrading your 54" Vortex Crossbars #RRVA137B-2 to the 59" Vortex Aero Crossbars #RRVA150B-2. I was told that you need to install the legs about 63.5mm (2-1/2") from the strip. You could also…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Answer 8

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 9

Hey Jim! The Taskmaster and Westlake tires, like the Taskmaster ST235/75R15 Off-Road #TA45RR and Westlake ST235/75R15 Off-Road #WST54FR you were looking at, are made in China. A lot of people tend to shy away from trailer tires made in China but…

view full answer...

Answer 10

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

view full answer...

Answer 11

I attached a picture that shows reels not hitting the roof of a vehicle that are being carried in the Rhino-Rack Ski and Fishing Rod Carrier #RR572. Unless you had a really low profile set of crossbars you wouldn't have any issue at all.

view full answer...

Answer 12

Hey Tim! Yes, the Rhino-Rack Ski and Fishing Rod Carrier #RR572 will fit the older Thule square crossbars. While this kit does come with T-Slot hardware, it also has the clamps which is what you'll use for the square crossbars.

view full answer...

Will The Batwing Awning Fit On Rhino Rack Vortex Crossbars?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching