Compatible B&W Base Rail Kit For A 2021 Ram 3500 Tradesman 8' Bed

Question

Question:

Will this fit a 2021 Dodge Ram Tradesman 3500, 8 foot bed? Im using a Andersen 3200 fifth wheel hitch

asked by: Dave

0

Expert Reply:

Yes, the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # BWRVK2605 is a compatible fit for your 2021 Dodge Ram Tradesman 3500 with an 8' bed and will allow you to mount your Andersen Ultimate Connection 5th Wheel Trailer Hitch # AM3200.

I've attached an installation video below where Shane will walk you through the process of installing this rail kit in the bed of your Ram.

expert reply by: Kevin C

0

Answer 1

You'll be able to use any industry standard rails to connect with your Trailer Saver BD3 Air Ride hitch. The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item #BWRVK2605 is an industry standard rail kit and is a…

view full answer...

Answer 2

My recommendation of a 5th wheel hitch will be dependent on the size of the bed on your 2018 Ram 3500. For a 6-1/2 foot bed I recommend the sliding B&W Patriot #BWRVK3270 or for an 8 foot long bed the B&W Patriot 5th Wheel Trailer Hitch…

view full answer...

Answer 3

I believe the Mega Cab was only offered on the 2500 and 3500 models so I will assume that is what your 2013 Ram is. If that is the case then you can choose between the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part…

view full answer...

Answer 4

Yes, the B and W fifth wheel rail kit part #BWRVK2605 is a confirmed fit for your short bed 2013 Ram 2500. It does require drilling through the bed of the truck but no drilling of the truck's frame. I attached an install video for this kit on a…

view full answer...

Answer 5

Your TrailerSaver TS3 Air-Ride Hitch will fit with industry standard rails so the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item #BWRVK2605 I recommended for the BD3 or any other industry standard rails will work…

view full answer...

Answer 6

While 6-1/2 foot is longer than most truck short beds it's still recommended to go with a slider hitch so that you can make tight turns unless the nose of your trailer is tapered to allow for short bed clearance. So for a slider hitch the B and W…

view full answer...

Answer 7

The problem isn't with the hitch fitting, the problems are that the 5th wheel's pin box strikes the sides of the bed during turns. The only way a fifth wheel hitch can be used in a Ram Box equipped truck would be to use a Reese Sidewinder.…

view full answer...

Answer 8

For your 2022 Ram 3500 Cab and Chassis you'll be able to use the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2605 that you were already looking at. These custom-fit brackets will allow you to mount to the…

view full answer...

Answer 9

The Demco 5th Wheel Rail Adapter for Ram #DM6099 fits into the factory towing prep puck system in such trucks and provides the equivalent of industry-standard above-bed base rails (ISRs) that will accept any hitch designed for ISRs. Fixed and sliding…

view full answer...

Answer 10

Yes the rails of the B and W fifth wheel rail kit part #BWRVK2605 that you referenced are compatible with the Andersen Ultimate Fifth Wheel Connection part #AM3200.

view full answer...

Answer 11

To be able to use the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR with your 2019 Ram 2500 with OEM pucks, you're just going to need the: -Demco 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package #DM6099. This rail…

view full answer...

Answer 12

The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item #BWRVK2605 is a confirmed fit for your 2017 Ram 3500 frame. The are meant to be above bed so the rails will sit higher than the frame when you bolt them on.

view full answer...