Higher Capacity Ladder Rack/Roof Rack that Fits Tonneau Cover Tracks

Question

Question:

I bought a rino rack from you. For my retract tonal cover. Do they make a heavier payload. Seems like I have a lot of bouncing. Going down the road. Thanks

asked by: David J

0

Expert Reply:

The Rhino Rack roof racks all have the standard 165 lb weight capacity for roof rack crossbars but if you didn't mind something that sat up a little higher we have the Yakima Outpost HD Overland Rack part # Y01152-5855 which has a 300 lb weight capacity instead.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Vortex Crossbars #RRVA180B-RRRLT600 are a great option to add to your 2017 Ford F-250 Super Duty Retrax XR cover! Roof mount bike racks can be a bit overwhelming to look through but from my experience the Thule racks are the easiest to…

view full answer...

Answer 2

I did see the review saying they used spacers, though that is the only time we have ever come across this, so I wouldn't say yes, spacers are going to be needed to use the Rhino-Rack system, which is the following part number: - Rhino-Rack Vortex…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Yes, the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers part #RRVA180B-RRRLT600 will absolutely work with the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails on your 2019 Ford F-250. It is actually designed…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Higher Capacity Ladder Rack/Roof Rack that Fits Tonneau Cover Tracks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching