Availability of Straight Air Fitting That Can Fit Top of Firestone Air Bag

Question

Question:

I would like to replace the 90 degree air line connectors that came with the Firestone 2407 air spring kit with straight connectors due to clearance issues with my exhaust. Do you offer a straight connector that will work . Thank you for your help

asked by: Jeff H

0

Expert Reply:

Yes, the # F3454-1 is a straight air tube fitting that fits the top of the Firestone air bag of the # F2407 that you referenced.

expert reply by: Jameson C

0

Answer 1

It's called an Inflation Valve. To replace one on the Firestone Coil-Rite Air Helper Springs item #F4174 you'll need item #F3032-1. Or item #F3467 for a 2-pack. It might not be the fitting. If the line wasn't cut perfectly straight it…

view full answer...

Answer 2

Based on my research, your brand new 2018 Flagstaff E-Pro 19FD Travel Trailer has a GVWR of 3,890 pounds. The GVWR refers to the most the trailer can weigh when fully loaded. I was able to pull up the online owner's manuals for both the 2016 Jeep…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

The 8-14.5 tires are an older metric size no longer used today. Therefore, you would need to replace these along with the wheels in order to update them. In order to see if we have any options for you, we'd first need to determine the bolt…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...