Linxup GPS Tracking Device Initial Set Up

Question

Question:

how do you turn it on

asked by: Kevin I

0

Expert Reply:

You will want to either connect it to your trailer or vehicles power source or charge the Linxup GPS Tracking Device w/ 4G Service - 3-3/4" Long x 2" Wide x 1" Tall item # 300-AT3-S to turn it on. There is no on or off switch the unit powers on automatically. Depending on the power source and movement it will send regular updates. I have linked a review video that goes over the function and installation methods.

expert reply by: Jerred H

0

Answer 1

Ideally you mount the Linxup GPS Tracking Device #300-AT3-S in a not so obvious location. I attached a picture that shows it mounted under the floor of a trailer on the frame. A thief isn't going to think to look for this. And if he did find…

view full answer...

Answer 2

The GPS Tracking Device w/ 4G Service #300-AT3-S does need to connect to a power source to function. I'd recommend running the red and white wires to the battery on the trailer and then the black to a ground and you'd have it wired…

view full answer...

Answer 3

The Linxup GPS tracking device part #300-AT3-S does come with a 1 year service. I have attached the monthly prices as they are now (November 2019) from the Linxup website for after the year is up. The GPS battery last up to 3 months once charged…

view full answer...

Answer 4

The Linxup GPS Tracking Device w/ 4G Service #300-AT3-S does not require a specific orientation to function properly. This allows you to hide it well so that it wouldn't be easily located in unfortunate event you'd ever need to track…

view full answer...

Answer 5

The Linxup GPS Tracking Device #300-AT3-S can be mounted anywhere it fits and the wiring can be installed. It also requires 1-year of tracking service.

view full answer...

Answer 6

The best trailer coupler lock for your Titan Model 10 Brake Actuator #T2478100 is the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33-40D because it locks your actuator with a stainless steel padlock that has a hardened steel shackle and busting…

view full answer...

Answer 7

The Global Link Vise Lock you'd mentioned, part #295-000024 would be a good addition, but it would only replace the puck-style lock you'd used. You'll still need to replace the latch kit with something like part #PLR658-SSP. From your…

view full answer...

Answer 8

The Linxup GPS Tracking Device #300-AT3 is for the unit itself while the Linxup GPS Tracking Device #300-AT3-S includes a 1-year subscription to the tracking service. If you are only looking for one unit it is best to get the unit with the tracking…

view full answer...

Answer 9

We do not currently carry the WHRZT GPS system, but we do have a similar product available from Linxup. I recommend the Linxup GPS Tracking Device #300-AT3 or the device with 4G service #300-AT3-S. When using this product the Linxup GPS device…

view full answer...

Answer 10

You are correct that even though the Linxup GPS Tracking Device w/ 4G Service #300-AT3-S has 8 wires, only 3 are used for its install. The red and white wires will connect to either the positive terminal of the battery on your trailer, or to the…

view full answer...

Answer 11

The Linxup GPS Tracking Device #300-AT3-S sends a signal via 4G service so the range is pretty much anywhere you would get cell service. We even heard (from the manufacturer) of a guy that used one of these on his farm to track a rogue cow. If you…

view full answer...

Answer 12

The Linxup GPS Tracking Device w/ 4G Service #300-AT3-S has a wiring harness about 30 inches long. This device will function inside the metal utility box of a dump trailer. It can be mounted with the label up on a support frame member under the…

view full answer...

Linxup GPS Tracking Device Initial Set Up

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching