Does GPS Tracking Device w/ 4G Service # 300-AT3-S Require Running to Ignition Wire

Question

Question:

Is the ignition wire nessasary?

asked by: Troy

0

Expert Reply:

The GPS Tracking Device w/ 4G Service # 300-AT3-S does need to connect to a power source to function. I'd recommend running the red and white wires to the battery on the trailer and then the black to a ground and you'd have it wired up. The rest of the wires would not be used.

expert reply by: Jameson C

0

Answer 1

The Linxup GPS tracking device part #300-AT3-S does come with a 1 year service. I have attached the monthly prices as they are now (November 2019) from the Linxup website for after the year is up. The GPS battery last up to 3 months once charged…

view full answer...

Answer 2

The Linxup GPS Tracking Device #300-AT3-S sends a signal via 4G service so the range is pretty much anywhere you would get cell service. We even heard (from the manufacturer) of a guy that used one of these on his farm to track a rogue cow. If you…

view full answer...

Answer 3

The Linxup GPS Tracking Device part #300-AT3-S comes with one year of service using 4G towers for signal. This will allow you to track the trailer wirelessly using a mobile app. Although there has since been the creation of 5G tower, there are very…

view full answer...

Answer 4

According to Linxup, the #300-AT3-S can indeed be powered from the 12V trailer circuit as well as its internal battery. The unit will run off the internal battery, which will be maintained by the 12V trailer circuit. When not attached to the 12…

view full answer...

Answer 5

The Galeo Pro GPS Tracking Device #GA94FR will update the location when you press the "Locate" button in the app. Otherwise you will get push notifications when it detects movement so you know when your trailer is being moved around…

view full answer...

Answer 6

The Galeo Pro GPS Tracking Device #GA94FR will need the tracking service plan to tell you where the vehicle is. The service plan is what allows the device to communicate over cell service its exact position.

view full answer...

Answer 7

You can mount the Linxup GPS Tracking Device w/ 4G Service #300-AT3-S in any of the locations you mentioned. I like your idea of inside the AC cover if at all possible as a thief wouldn't ever think to check there for a tracking device but could…

view full answer...

Answer 8

I spoke with my contact at Linxup regarding the GPS Tracking Device w/ 4G Service #300-AT3-S referenced in your question. The red and white wires on the device will connect either to the positive post on your battery or to the ignition wire. The…

view full answer...

Answer 9

You will want to either connect it to your trailer or vehicles power source or charge the Linxup GPS Tracking Device w/ 4G Service - 3-3/4" Long x 2" Wide x 1" Tall item #300-AT3-S to turn it on. There is no on or off switch the unit…

view full answer...

Answer 10

The Linxup GPS Tracking Device w/ 4G Service #300-AT3-S does not require a specific orientation to function properly. This allows you to hide it well so that it wouldn't be easily located in unfortunate event you'd ever need to track the…

view full answer...

Answer 11

Ideally you mount the Linxup GPS Tracking Device #300-AT3-S in a not so obvious location. I attached a picture that shows it mounted under the floor of a trailer on the frame. A thief isn't going to think to look for this. And if he did find it…

view full answer...

Answer 12

The Linxup GPS Tracking Device #300-AT3 is for the unit itself while the Linxup GPS Tracking Device #300-AT3-S includes a 1-year subscription to the tracking service. If you are only looking for one unit it is best to get the unit with the tracking…

view full answer...

Does GPS Tracking Device w/ 4G Service # 300-AT3-S Require Running to Ignition Wire

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching