Can Weight Distribution With Sway Control be Used on Nissan Pathfinder With Vehicle Sway Control
Question:
Hi, I just bought a 20 ft TT and the dealer is putting on a WDH without sway bar. My tow vehicle has sway control and Ive heard that I should not put a sway bar on the trailer because it would counteract/conflict with the vehicle sway control? Wondering if you have any experience with this and whether or not I should add a sway bar. Owners manual was no help. Thanks for your help.
asked by: Neil
Expert Reply:
After looking at the owner's manual for your 2022 Nissan Pathfinder, nothing says you cannot use sway control with the vehicle sway control system. There is a "Sway control device" section which only says make sure the device will work with the vehicle, hitch, trailer and the trailer's brake system.
If you choose to use a WDH like the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37060ET you could shut off the vehicle sway control system to ensure there is no conflict between the two. This would also be a much better option for controlling trailer sway while also keeping you level.
Also, make sure the weight distribution hitch is properly rated for your trailer. Tongue weight is the most important factor when choosing a WDH. For example, the # EQ37060ET is rated for tongue weights from 200-600 lbs. This will be the loaded tongue weight. Tongue weight is typically 10-15% of your loaded trailer weight.
I have attached some helpful articles on weight distribution for your reference.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Shop: Malone 2" Dual Purpose Hitch Receiver
- Video: etrailer Trailer Hitch Installation - 2015 Toyota Highlander
- Q&A: 4-Way to 7-Way Adapter Recommendation for Installing Curt Echo Brake Controller
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Hitch
- Q&A: Using a Weight Distribution System on a Boat Trailer With Surge Brakes
- Shop: Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Choosing the Right Brake Controller
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Search Results: brake controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Article: Trailer Wiring Diagrams
- Search Results: weight distribution hitch
- Video: etrailer Campers and Utility Trailers Tongue Weight Scale Review
on Weight Distribution Hitch
