Kuat Beta Bike Rack that Fits Class II 1-1/4 inch Trailer Hitch

Question

Question:

Hi there I have a Curt class 2 , 1.25 inch hitch receiver on my 2019 Camry SE. Will the Beta 2 fit my Curt receiver and will there be any issues with the pin Thanks

asked by: Munesh

1

Helpful Expert Reply:

We have a Kuat Beta bike rack that fits Class II 1-1/4 inch hitches like what you have on your 2019 Toyota Camry with the part # B202-114 but the 2 inch version of the Beta will not work.

expert reply by: Jameson C

1

Answer 1

Since the Thule Helium Pro Bike Rack for 3 Bikes #TH9043PRO is a hanging-style back rack it's not recommended to tilt with bikes on it because you'd end up having the bikes touch the ground, each other, of the vehicle. Without a cradle to…

view full answer...

Answer 2

Most bike racks that tilt down are not rated to do so with the bikes loaded. You would have to unload the bikes from the Thule Helium #TH9043PRO to be able to tilt it down and even then some times it isn't enough to open the hatch on some…

view full answer...

Answer 3

Yes, we do have some lightweight bike rack options for your 2017 Honda CR-V that will be very easy to remove. Kuat has their Beta hanging style bike rack which carries up to 2 bikes weighing in at 40 lbs each but weighs in at a mere 12.6 lbs. This…

view full answer...

Answer 4

The Kuat Beta #B202-2 uses the wedge style of anti-rattle. When you turn the knob at the end of the rack the wedge pushes out to reduce or eliminate movement of the rack in the hitch. I have linked a video review of this rack for you. This particular…

view full answer...

Answer 5

The lightest weight bike rack we have is the Kuat Beta which we have the part #B202-2 for a 2 inch hitch or part #B202-114 for a 1-1/4 inch hitch. This rack weighs 12 lbs which is the lightest option out there. Because of this it would be your best…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Since the upright mast of the Kuat Beta #B202-2 attaches to the side of the shank that slides into the hitch you end up with the bike rack offset to the passenger side by a couple inches. It's never been enough of an offset to cause an issue with…

view full answer...

Answer 8

The Yakima HoldUp Bike Rack for 2 Bikes #Y02445 is the best option we have if you want a platform rack for your bikes. This rack measures 15" from the center of the hitch pin hole when folded up. This is the most narrow rack we have when folded.…

view full answer...

Answer 9

The original Thule Helium was made of ultra-lightweight aluminum, featured sliding anti-sway T3 cradles with rubber straps. The cradle arms were spaced 12 inches apart (outside to outside). The rack could fold and tilt. It also featured an integrated…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Kuat Beta Bike Rack that Fits Class II 1-1/4 inch Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching