Does The Roadmaster Exact Center RM64RR Contain The Mounting Brackets For 2020 Jeep Gladiator?

Question

Question:

Does the Exact Center for the Jeep Gladiator come with the mounting bracket or does that need to be ordered separately?

asked by: Greg

0

Expert Reply:

You will need the Custom Mounting Brackets # RM34RR for your 2020 Jeep Gladiator along with the Roadmaster Exact Center Steering Stabilizer # RM72ZR.

expert reply by: Bud M

0

Answer 1

I checked with Roadmaster, and while there is a steering stabilizer for your 2021 Thor Magnitude BB35 Class C on a Ford F-550 chassis, there is not an Exact Center stabilizer, just the Reflex. The correct part number for your Thor is the following: -…

view full answer...

Answer 2

For your 2018 Jeep Wrangler Unlimited JL there is the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM49RR that you found that is for the larger 33-37" tires. It comes with the Custom Mounting Brackets #RM34RR and Roadmaster…

view full answer...

Answer 3

Yes, the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis, #RM36RR will have a installation instructions included. I also highly recommend the Roadmaster Anti-Sway Bars, #RM-1139-146 for the rear and,…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...