Correct Replacement Mounting Clamp for a Thule Hyper XL Cargo Box

Question

Question:

Hi, Is the correct part of. Hyper XL? TH7521484001

asked by: Jason G

0

Expert Reply:

The Replacement AcuTight Mounting Hardware with Screw part # TH7521484001 I confirmed with Thule is correct for a Thule Hyper XL Cargo Box.

expert reply by: Conner L

0

Answer 1

To replace the Mounting Assembly for the Thule Sonic Large, you'll need: Thule AcuTight Mounting Hardware Clamp, part #TH7521484001 Thule Replacement Cradle for AcuTight Mounting Hardware, part #TH8523387001

view full answer...

Answer 2

From where the Thule Aeroblade Edge Roof Rack part numbers #TH7602B-TH7603B and #THKIT3112 will install on your vehicle they will add right at an additional 2-1/2 inches of height to the vehicle. I attached a picture that shows this dimension.

view full answer...

Answer 3

Since the Replacement AcuTight Mounting Hardware with Screw #TH7521484001 and Replacement Quick Grip Mount Assembly #TH05738 use the same mounting cradle #TH8523387001 you will have no issues using one Quick Grip to replace your damaged AcuTight.

view full answer...

Answer 4

Installing a replacement hinge or strut on your Thule rooftop cargo box isn't complicated, but it does take some force. I have added a link to a video showing how to do this, and you can forward to about the 1:30 part to get to the nitty…

view full answer...

Answer 5

The Yakima JetStream Bars, part #Y00425, are 3-1/8" wide x 1" tall. The Thule Motion XT Rooftop Cargo Box, part #TH629706, has a maximum fit of 3-1/2" wide x 1-11/16". So, this cargo box will definitely fit around…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Correct Replacement Mounting Clamp for a Thule Hyper XL Cargo Box

Product Page this Question was Asked From

Continue Researching