Replacement Awning Arm Kit for Dometic 8500 Series Awning

Question

Question:

I have older dometic 8500 that I need support arms for.I understand no parts available anymore.would the lc434717 work.my tube # is 801eh18.5000 product # 958313997 and # on arms are 8275000.401u product # 958455984 and do these match up with original holes in camper thanks

asked by: Keith K

1

Helpful Expert Reply:

Yes the Solera Classic Universal Awning Support Arms for RVs # LC434717 can replace your Dometic awning arms and will work great with your current roller.

expert reply by: Jameson C

1

Answer 1

If you have a Dometic spring-loaded manual awning on your 2015 Coachman Catalina 213BH we do have replacement awning support arms which will work; you simply need to choose the correct length and color from the following: - Solera Classic Universal…

view full answer...

Answer 2

Thank you for the photo; the individual rails are not available separately so you will need to get the Support Arm Assembly such as #LC281154 to replace your bent rail. This assembly has 69" support arms and is to be used with standard awning…

view full answer...

Answer 3

Thanks for the picture of your awning when it is retracted. Based on that yours is retracted enough to be totally safe.

view full answer...

Answer 4

I do have an option for you but you can't use a Solera Awning Head with Carefree Awning Arms. The arms and head must both match but you can use a Solera Awning Head/Arms with a Carefree Awning Roller Tube/Fabric. For this, the Solera Classic…

view full answer...

Answer 5

The awning arms are measured from top to bottom of the wall mount. This can then be used to select the correct length replacement. I have attached a photo below to assist. You will also need to pay attention to the style of arms such as pitched or…

view full answer...

Answer 6

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 7

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 8

Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes down to the…

view full answer...

Answer 9

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 10

To get power to the controller of your Solera Smart Arm 12V Power RV Awning part #LC759404, you need to tap into an existing circuit, or run a power wire from the battery with an inline fuse holder, and a 15 amp fuse, like part #SWC9538, and part…

view full answer...

Answer 11

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 12

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...