What do I Need to Add Electric Brakes to My 3500 Pound Lippert Axle?
Question:
I have a trailer Phanthom II 5X8 5A, whith Lippert axle, whitout brakes and I want to install electric brakes, the axle information is as follows: Variant#V000111485 Cust Part#-10-AXL 146 Cust PO# 00.41924 LC135-D1-74-58-NOSP-US-L545-7242 Serial #: 045-003245960 GAWR 3500 lbs Mfg. Date: 04/27/15 The question is, is possible to do that, whit this axle, or I need a new axle whit brakes? Thank You.
asked by: Juan
Expert Reply:
With the information you provided, I did some research on your Lippert axles. Even though I could not find the exact Lippert model you have, we can definitely narrow down compatible electric brakes for your 3500 pound axles. If you currently have hubs installed, I recommend the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35. With these brakes, they come with adjuster plugs and e-coated backing plates to resist rust/corrosion.
Depending on the your current axles, you need a standard 4-hole brake flange. I went ahead and attached a product page that shows our current available brake flanges.
Once the brakes are installed, you also need a brakeaway kit like the Hopkins # 20400 for safety just in case the trailer gets disconnected. As far as trailer wiring, I recommend setting up your trailer with the 7-Way Molded Trailer Wire Connector, 6' Long # H20044. To have a brake controller, the easiest setup is with the Curt Echo # C51180. In addition to the simple installation, the Echo gives you the ability to monitor your brakes with your smart phone.
If you need hubs to accommodate the brakes, it really depends on the bolt pattern of your wheels. For instance, if you have the common 5 on 4-1/2 bolt pattern, I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3 (for standard spindles) or the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K (if you have EZ lube spindles). Both of these hubs are compatible with the # AKEBRK-35.
Products Referenced in This Question
Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- LED Tester
- Hopkins
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
7-Way Molded Trailer Wire Connector, 6' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Aluminum Liger Trailer Wheel - 15" x 5" - 5 on 4-1/2 - Gunmetal Gray
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Jacketed 2 Wire (Brake Wire) - 12 Gauge - per Foot
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
- Search Results: brake controller
- Search Results: etbc7l
- Search Results: bearcat
- Search Results: trailer fenders
- Search Results: trailer accessories
- Search Results: 15 wheel
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Amperage of Brake Magnets and Size of Wire Used To Connect 7-Way Trailer Plug To Electric Brakes
- Video: Hopkins 4-Pole to 7-Pole and 4-Pole Adapter Installation - 2014 Honda Odyssey
- Video: etrailer Trailer Brakes AKBRKR-M10 Review
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: trailer axles
- Q&A: Can I Upgrade 3,500 lb Axles to 5,200 lb Axles on a Budget
- Video: Choosing the Right Brake Controller
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes