Hitch Pin Replacement for Yakima Ridgeback Bike Rack

Question

Question:

I have a RidgeBack TILT-AWAY HITCH BIKE RACK SKU: #8002457 Which SKU do I need to replace the Hitch Pin?

asked by: Ernesto O

0

Expert Reply:

The pin you're looking for for your Yakima Ridgeback is part # 889-0231.

expert reply by: Jameson C

0

Answer 1

With the Yakima Supreme Getaway being discontinued in 2000, they could not confirm the fitment of the Replacement Hitch Pin for Yakima Hanging-Style Bike Carriers #889-0231. However, I did have one measured. It will have a diameter of 3/8 inches,…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 6

If the Yakima RidgeBack Bike Rack was just purchased then most likely the wedge is not tightened correctly and you just need to redo that portion of the install process. However, if this is an older bike rack then most likely the cause of this is…

view full answer...

Answer 7

You can definitely make any modifications you'd like to your Yakima HoldUp EVO, part #Y02479. However, you should know that this will void your warranty, and so I cannot recommend it. If you choose to drill another hole and use the Replacement…

view full answer...

Answer 8

We offer replacement keys as well as locks and many other parts for bike racks like the Ridgeback 4 from Yakima, as well as racks from Thule and others. To choose the right key for your rack's lock you will need to remove the unlocked core from…

view full answer...

Answer 9

If you look at page 3 of the attached installation instructions for the Yakima RidgeBack Bike Rack, part #Y02458, you can see a drawing that has a box with 1-1/4 inch in it. This bike rack is designed to fit a 1-1/4 inch hitch if it is a Class ll…

view full answer...

Answer 10

The correct replacement pin for a Yakima Ridgeback 4 is the part #889-0231.

view full answer...

Hitch Pin Replacement for Yakima Ridgeback Bike Rack

Product Page this Question was Asked From

Continue Researching