Longer Thule Replacement Screws

Question

Question:

is there a longer screw for this item? My new roof rack is pretty thick and the bolts just barely reach. Replacement Tamperproof Screw for Thule Ride-On Adapter, Bed-Rider, Flat Top or Snowboard Rack Item # 853-5269

asked by: Conner O

0

Expert Reply:

Thanks for the picture! Yes, we do offer a longer screw it is the M6x50 Tamperproof Screw item # TH853526902. This Thule Replacement screw has a length of 50mm or 1.969 inches.

expert reply by: Jerred H

0

customer pic
(click to enlarge)

Answer 1

If you just want the screws you can use #853-5269 which are sold individually and are 1-3/16 inches long. If you decide you want the mounts for just a few dollars more, you will the Replacement Mounting Brackets and Hardware for Thule Pull Top…

view full answer...

Answer 2

The correct bolt you need for your Thule roof ski rack is the part #853-5269 that you referenced. The correct replacement tool you'd need is the part #853-5270-02 as well.

view full answer...

Answer 3

The Thule Replacement Bolt #915-0650-54 is 1.97 inches long; it is an M6 x 50 bolt and works with a variety of Thule carriers.

view full answer...

Answer 4

The Replacement SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carriers #7521241001 or the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks #TH7520970001 will be compatible with the aero style bar. Either…

view full answer...

Answer 5

I contacted Thule about your older Ski and Snowboard rack and my contact said that the only replacement mounting brackets available for older racks is the Kit #7533998, that you referenced. They said that this will only fit on the older 724 or 725…

view full answer...

Answer 6

We do have many parts available for your older Thule Flat Top 724 ski carrier. Here is what we carry as replacements: - Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks #7533998 (will need #THXADAPT7 if your crossbars are over 30mm…

view full answer...

Answer 7

Thule Replacement Tamperproof M6 Screw #853-5269 has a threaded portion that measures 1-1/8-inches and the thread count is 24-tpi. Similar Replacement Tamperproof Screw #TH853526902 has the same diameter and thread count but it is 50mm long…

view full answer...

Answer 8

I do have an alternative solution for you to carry your skis with a Thule carrier, but unfortunately just as you stated, the top mounting bracket part of your Flat Top Ski Carrier 91725 isn't replaceable. If you still prefer to use a Thule…

view full answer...

Answer 9

Thank you for the picture, that really helped. I was able to track down everything but the attachment bracket, for this one I would need the model of your ski rack. However, for the bolt, you'll want #915-0650-54 which is a M6x50mm carriage…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Longer Thule Replacement Screws

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching